Abstract:The steam reforming of isooctane and methylcyclohexane (MCH) was investigated over Fe- and Ni-based catalysts. FeMg/Al2O3 catalyst, effective for CH4 decomposition in the presence of O2/CO2, was active for steam reforming of isooctane, being a little easier to cause C−C bond cleavage than MCH, but the rate of hydrogen production was insufficient, although the rate was only slightly improved by Rh modification, due to raised formation of CH4 and C2. FeMg/Al2O3 catalyst was also less active for the steam reforming of MCH than Ni systems. Modification of FeMg/Al2O3 catalyst with rhodium resulted in the increased formation of aromatic byproducts. The rate of H2 production with Ni/ZrO2 catalyst was found to be 7 times higher than that with FeMg/Al2O3. Furthermore, the stability of the Ni/ZrO2 catalyst was found to be improved by the addition of alkaline-earth metals into the catalyst (M/Ni = 1:2 wt ratio). In particular, the addition of Sr was the most effective and the activity of NiSr/ZrO2 catalyst for the reaction at 973 K remained stable after 100 hours, although below 10% decrease in the rate of H2 formation was observed. On the contrary, above 50% decrease in the rate was observed over Ni/ZrO2 catalyst, after 100 hours. This Sr effect, possibly, could be associated with the formation of mixed oxides consisting of Sr and Zr (or Ni). The NiSr/ZrO2 catalyst was also effective for the steam reforming of model gasoline, which contained organic mixtures with different reforming reactivities such as naphthenes, aromatics, and n- and iso-paraffins.

Hydrogen Production by Catalytic Steam Reforming of Bio-Oil, Naphtha and Ch4 over C12a7-Mg Catalyst

Production of hydrogen from catalytic steam reforming of bio-oil using C12A7-O−-based catalysts

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

Catalytic Conversion Of Bio-Oil To Hydrogen On The C12a7-Mgo Catalyst

Hydrogen Production from Steam Reforming of Bio-Oil with C12A7-K2O Catalyst

Hydrogen Production by Catalytic Steam Reforming of Heavy Components in Bio-Oil in Fluidized Bed Reactor

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Biomass Fast Pyrolysis Oil

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Bio-Oil

Catalytic Steam Reforming of Fast Pyrolysis Bio‐Oil in Fixed Bed and Fluidized Bed Reactors

Steam Reforming of Bio‐Oil for Hydrogen Production: Effect of Ni‐Co Bimetallic Catalysts

Steam Reforming of Model Compounds and Fast Pyrolysis Bio-Oil on Supported Nickle Metal Catalysts for Hydrogen Production

Preparation of Hydrogen Through Catalytic Steam Reforming of Bio-oil

Hydrogen Production Through Catalytic Steam Reforming of Simulacrum of Light Component of Bio-Oil in a Fluidized Bed Reactor

Hydrogen Production Via Catalytic Steam Reforming of Bio-Oil Model Compound in A Two-Stage Reaction System

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

Hydrogen Production from Steam Reforming of Hydrocarbons over Alkaline-Earth Metal-Modified Fe- or Ni-Based Catalysts

STUDY ON HYDROGEN PRODUCTION VIA CATALYTIC STEAM REFORMING OF FAST PYROLYSIS BIO-OIL

STEAM REFORMING BIO-OIL TO PRODUCE HYDROGEN IN A FLUIDIZED BED REACTOR

Hydrogen Production Via Catalytic Steam Reforming of Fast Pyrolysis Bio-oil in a Fluidized-Bed Reactor

Steam Reforming of Bio-Oil from Rice Husks Fast Pyrolysis for Hydrogen Production.

Mechanism of hydrogen production by the catalytic steam reforming of bio-oil