Abstract:The steam reforming of bio-oil-derived acetic acid over the developed Ni/CeO2-ZnO nanoparticle catalysts for hydrogen production was studied. The correlations of CeO2 to ZnO mass ratio (CZMR) and nickel loading with the properties and performances of Ni/CeO2-ZnO catalysts were explored. The H2, CO, and potential H2 yields followed a Gaussian normal distribution with increasing the CZMR. An exponential function equation was established to correlate the H2, CO, and potential H2 yields with Ni loading. As the CZMR increased from 0 to 1/3, the H2 yield increased from 57.8 to 69.4%, with a growth rate of 20.1%. Further, on increasing the CZMR from 1/3 to 3, the H2 yield decreased by 37.6%. The CO yield showed a similar trend for the H2 yield on increasing the CZMR, which first increased to a peak value, then started to decrease rapidly and finally stabilized. The yield of H2 increased significantly from 20.6 to 73.5%, with the increase of nickel loading from 0 to 15%. Further, on increasing the nickel loading from 15 to 25%, the H2 yield increased by only 5.8%. With the CZMR of 1/3 and the nickel loading of 15%, the selectivities of H2 and CO were as high as 91.6 and 42.3%, respectively.This article has not yet been cited by other publications.

Steam Reforming of Model Compounds and Fast Pyrolysis Bio-Oil on Supported Nickle Metal Catalysts for Hydrogen Production

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Biomass Fast Pyrolysis Oil

Preparation of Hydrogen Through Catalytic Steam Reforming of Bio-oil

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Bio-Oil

Sustainable hydrogen from bio-oil steam reforming of acetic acid as a model oxygenate

Catalytic Steam Reforming of Fast Pyrolysis Bio‐Oil in Fixed Bed and Fluidized Bed Reactors

Steam Reforming of Bio‐Oil for Hydrogen Production: Effect of Ni‐Co Bimetallic Catalysts

Hydrogen Production by Catalytic Steam Reforming of Heavy Components in Bio-Oil in Fluidized Bed Reactor

Catalytic steam reforming of bio-oil model compounds for hydrogen production over coal ash supported Ni catalyst

Hydrogen Production Via Steam Reforming of Acetic Acid over Biochar-Supported Nickel Catalysts

Catalytic Steam Reforming of Bio-Oil-Derived Acetic Acid over CeO 2 -ZnO Supported Ni Nanoparticle Catalysts

Steam Reforming of Model Bio-Oil Aqueous Fraction Using Ni-(Cu, Co, Cr)/SBA-15 Catalysts

Mechanism of hydrogen production by the catalytic steam reforming of bio-oil

Hydrogen Production Via Catalytic Reforming of the Bio-Oil Model Compounds: Acetic Acid, Phenol and Hydroxyacetone

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

STUDY ON HYDROGEN PRODUCTION VIA CATALYTIC STEAM REFORMING OF FAST PYROLYSIS BIO-OIL

Sustainable carbon-based nickel catalysts for the steam reforming of model compounds of pyrolysis liquids

Deactivation and Regeneration of Catalyst for Steam Reforming of Bio-Oil to Produce Hydrogen

Effect of Coal Ash on the Steam Reforming of Simulated Bio-oil for Hydrogen Production over Ni/γ-Al2O3

Sustainable hydrogen production from steam reforming of bio-oil model compound based on carbon deposition/elimination