Abstract:Hydrogen production was prepared via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system. Low-cost catalyst dolomite was chosen for the primary steam reforming of bio-oil in consideration of the unavoidable deactivation caused by direct contact of metal catalyst and bio-oil itself. Nickel-based catalyst Ni/MgO was used in the second stage to increase the purity and the yield of desirable gas product further. Influential parameters such as temperature, steam to carbon ratio (S/C, S/CH4), and material space velocity (WBHSV, GHSV) both for the first and the second reaction stages on gas product yield, carbon selectivity of gas product, CH4 conversion as well as purity of desirable gas product were investigated. High temperature (>850 °C) and high S/C (>12) are necessary for efficient conversion of bio-oil to desirable gas product in the first steam reforming stage. Low WBHSV favors the increase of any gas product yield at any selected temperature and the overall conversion of bio-oil to gas product increases accordingly. Nickel-based catalyst Ni/MgO is effective in purification stage and 100% conversion of CH4 can be obtained under the conditions of S/CH4 no less than 2 and temperature no less than 800 °C. Low GHSV favors the CH4 conversion and the maximum CH4 conversion 100%, desirable gas product purity 100%, and potential hydrogen yield 81.1% can be obtained at 800 °C provided that GHSV is no more than 3600 h−1. Carbon deposition behaviors in one-stage reactor prove that the steam reforming of crude bio-oil in a two-stage fixed bed reaction system is necessary and significant.

Steam Reforming of Bio-Oil from Rice Husks Fast Pyrolysis for Hydrogen Production.

Thermal Characteristics of Biomass Pyrolysis Oil and Potential Hydrogen Production by Catalytic Steam Reforming

Catalytic Steam Reforming of Fast Pyrolysis Bio‐Oil in Fixed Bed and Fluidized Bed Reactors

Comparative study on the catalytic steam reforming of biomass pyrolysis oil and its derivatives for hydrogen production

STUDY ON HYDROGEN PRODUCTION VIA CATALYTIC STEAM REFORMING OF FAST PYROLYSIS BIO-OIL

Preparation of Hydrogen Through Catalytic Steam Reforming of Bio-oil

Hydrogen Production Via Catalytic Steam Reforming of Fast Pyrolysis Bio-oil in a Fluidized-Bed Reactor

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Biomass Fast Pyrolysis Oil

Hydrogen production from steam reforming of bio-oil model compound and byproducts elimination

Mechanism of hydrogen production by the catalytic steam reforming of bio-oil

Hydrogen production via catalytic steam reforming of fast pyrolysis bio-oil in a two-stage fixed bed reactor system

Steam Reforming of Bio-Oil for Hydrogen Production Over Biochar Supported Catalyst

STEAM REFORMING BIO-OIL TO PRODUCE HYDROGEN IN A FLUIDIZED BED REACTOR

Hydrogen Production by Catalytic Steam Reforming of Model Compounds of Bio-Oil

Bio-oil catalytic reforming without steam addition: Application to hydrogen production and studies on its mechanism

Hydrogen Production Via Catalytic Steam Reforming of Bio-Oil Model Compound in A Two-Stage Reaction System

Hydrogen Production by Catalytic Steam Reforming of Heavy Components in Bio-Oil in Fluidized Bed Reactor

Steam Reforming of Bio‐Oil for Hydrogen Production: Effect of Ni‐Co Bimetallic Catalysts

Steam Reforming of Model Compounds and Fast Pyrolysis Bio-Oil on Supported Nickle Metal Catalysts for Hydrogen Production

Catalytic Conversion Of Bio-Oil To Hydrogen On The C12a7-Mgo Catalyst

Aqueous-phase reforming of the low-boiling fraction of rice husk pyrolyzed bio-oil in the presence of platinum catalyst for hydrogen production.