Abstract:Multi-band transmission is one of the key practical solutions to cope with the continuously growing demand on the capacity of optical communication networks without changing the huge existing fiber base. However, ultra-broadband communication requires the development of novel power efficient optical amplifiers operating beyond C- and L-bands, and this is a major research and technical challenge comparable to the introduction of the seminal erbium-doped fiber amplifiers that dramatically changed the optical communication sector. There are several types of optical fibers operating beyond C- and L-bands that can be used for the development of such amplifiers, specifically the fibers doped with neodymium, praseodymium, thulium, and bismuth. However, among these, Bi-doped fibers are of special interest as the most promising amplification medium because, unlike the others, different Bi-associated active centers allow amplification in an enormous band of overall width of 700 nm (1100–1800 nm). Such spectral coverage can be obtained by using different host materials, such as aluminosilicate, phosphosilicate, silica, and germanosilicate glasses. Here, we report a novel Bi-doped fiber amplifier with record characteristics for E-band amplification, including the highest power conversion efficiency among telecom-compatible E-band amplifiers reported to date. This bismuth-doped fiber amplifier (BDFA) features a maximum gain of 39.8 dB and a minimal noise figure of 4.6 dB enabled by 173 m Bi-doped fiber length. The maximum achieved power conversion efficiency of 38% is higher than that of L-band Er-doped fiber amplifiers. This performance demonstrates the high potential of BDFA for becoming the amplifier of choice in modern multi-band optical communication networks.

Experimental Study on Polarization-Maintaining Erbium-Doped Fiber Amplifier

Experimental Realization of A Pbse Quantum Dot Doped Fiber Amplifier with Ultra-Bandwidth Characteristic

Experimental study of two-stage erbium doped fiber amplifiers pumped by 980 nm and 1480nm LD

Experimental Study of the Temperature and Electron-Irradiation Effect on Erbium-Doped Fiber Amplifiers

2.3 W, Linearly-Polarized Superfluorescent Generation from a Polarization-Maintaining Er3+-Doped Fluoride Fiber Amplifier Around 2.8 Μm

Gain performance and gain modulation of 980nm-pumped erbium-doped fibre amplifiers

Theoretical and Experimental Investigations on Erbium-Doped Fiber Amplifiers

INTELLIGENT ERBIUM DOPED FIBER AMPLIFIER

ERBIUM DOPED FIBER AMPLIFIER USING FIBER BRAGG GRATINGS AS GAIN EQUALIZER

Study on a Novel Low-Noise Erbium-Doped Fiber Amplifier

Theoretical and Experimental Investigation on Erbium-Doped Fiber Amplifiers with Long-Period Fiber Grating Filters

Modeling and Optimizing of Low-Repetition-rate High-Energy Pulse Amplification in High-Concentration Erbium-Doped Fiber Amplifiers

Study on the characteristics of hybrid pumped erbium-doped fiber amplifiers (HEDFA)

Gain Performances of 980 Nm-Pumped Erbium-Doped Fiber Amplifiers

Investigation of the Irradiation Effect on Erbium-Doped Fiber Amplifiers Composed by Different Density Erbium-Doped Fibers

Improved Gain Performance of High Concentration Er/sup 3+/-Yb/sup 3+/-Codoped Phosphate Fiber Amplifier

A New Adaptive Erbium-Doped Fiber Amplifier

Polarization-dependent gain in bismuth-doped phospho- and germanosilicate fiber amplifiers

E-band telecom-compatible 40 dB gain high-power bismuth-doped fiber amplifier with record power conversion efficiency

65 GHz Linearly Polarized Kilowatt Fiber Amplifier Based on Active Polarization Control

Efficient Fibre Amplifiers Based on A Highly Er3+/Yb3+ Codoped Phosphate Glass-Fibre