Abstract:Multi-band transmission is one of the key practical solutions to cope with the continuously growing demand on the capacity of optical communication networks without changing the huge existing fiber base. However, ultra-broadband communication requires the development of novel power efficient optical amplifiers operating beyond C- and L-bands, and this is a major research and technical challenge comparable to the introduction of the seminal erbium-doped fiber amplifiers that dramatically changed the optical communication sector. There are several types of optical fibers operating beyond C- and L-bands that can be used for the development of such amplifiers, specifically the fibers doped with neodymium, praseodymium, thulium, and bismuth. However, among these, Bi-doped fibers are of special interest as the most promising amplification medium because, unlike the others, different Bi-associated active centers allow amplification in an enormous band of overall width of 700 nm (1100–1800 nm). Such spectral coverage can be obtained by using different host materials, such as aluminosilicate, phosphosilicate, silica, and germanosilicate glasses. Here, we report a novel Bi-doped fiber amplifier with record characteristics for E-band amplification, including the highest power conversion efficiency among telecom-compatible E-band amplifiers reported to date. This bismuth-doped fiber amplifier (BDFA) features a maximum gain of 39.8 dB and a minimal noise figure of 4.6 dB enabled by 173 m Bi-doped fiber length. The maximum achieved power conversion efficiency of 38% is higher than that of L-band Er-doped fiber amplifiers. This performance demonstrates the high potential of BDFA for becoming the amplifier of choice in modern multi-band optical communication networks.

Polarization-dependent gain in bismuth-doped phospho- and germanosilicate fiber amplifiers

Polarization-dependent gain in bismuth-doped phospho- and germanosilicate fiber amplifiers

High bismuth-doped germanosilicate fiber for efficient E?+?S-band amplification

Polarization dependent gain in Raman fiber amplifiers with multiple pumps

Realizing 48.5 dB Gain in the E+S Band Using 12 m Bismuth‐Doped Fiber

E-band telecom-compatible 40 dB gain high-power bismuth-doped fiber amplifier with record power conversion efficiency

Numerical and experimental analysis of polarization dependent gain vector in Brillouin amplification system

Bismuth-doped fiber amplifier based on a linear cavity double pass structure operating in the O?+?E band

Broadband bismuth-doped fiber amplifiers

High gain and low noise O+E bands fiber amplification based on hybrid bismuth-doped fiber

Looped Polarization-Insensitive Fiber Optical Parametric Amplifiers for Broadband High Gain Applications

Polarization Dependent Gain Stability of Raman Amplification Single-Core Feedback Structure Based on Consistency of Long-Axis Azimuths Variation

Broadband Optical Amplification in Bi‐Doped Multicomponent Glass Fiber

A double-clad ytterbium-doped tapered fiber with circular birefringence as a gain medium for structured light

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

E- and S-band Bismuth-Doped Fiber Amplifier

Amplification Properties of Erbium-Doped Solid-Core Photonic Bandgap Fibers

Fiber amplification of radially and azimuthally polarized laser light

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

A 23-dB bismuth-doped optical fiber amplifier for a 1700-nm band