Abstract:Multi-band transmission is one of the key practical solutions to cope with the continuously growing demand on the capacity of optical communication networks without changing the huge existing fiber base. However, ultra-broadband communication requires the development of novel power efficient optical amplifiers operating beyond C- and L-bands, and this is a major research and technical challenge comparable to the introduction of the seminal erbium-doped fiber amplifiers that dramatically changed the optical communication sector. There are several types of optical fibers operating beyond C- and L-bands that can be used for the development of such amplifiers, specifically the fibers doped with neodymium, praseodymium, thulium, and bismuth. However, among these, Bi-doped fibers are of special interest as the most promising amplification medium because, unlike the others, different Bi-associated active centers allow amplification in an enormous band of overall width of 700 nm (1100–1800 nm). Such spectral coverage can be obtained by using different host materials, such as aluminosilicate, phosphosilicate, silica, and germanosilicate glasses. Here, we report a novel Bi-doped fiber amplifier with record characteristics for E-band amplification, including the highest power conversion efficiency among telecom-compatible E-band amplifiers reported to date. This bismuth-doped fiber amplifier (BDFA) features a maximum gain of 39.8 dB and a minimal noise figure of 4.6 dB enabled by 173 m Bi-doped fiber length. The maximum achieved power conversion efficiency of 38% is higher than that of L-band Er-doped fiber amplifiers. This performance demonstrates the high potential of BDFA for becoming the amplifier of choice in modern multi-band optical communication networks.

Bismuth-doped fiber amplifier based on a linear cavity double pass structure operating in the O?+?E band

Broadband bismuth-doped fiber amplifiers

High gain and low noise O+E bands fiber amplification based on hybrid bismuth-doped fiber

High-gain ultra-wideband bismuth-doped fiber amplifier operating in the O + E + S band

High bismuth-doped germanosilicate fiber for efficient E?+?S-band amplification

Broadband Optical Amplification in Bi‐Doped Multicomponent Glass Fiber

E-band telecom-compatible 40 dB gain high-power bismuth-doped fiber amplifier with record power conversion efficiency

E- and S-band Bismuth-Doped Fiber Amplifier

Realizing 48.5 dB Gain in the E+S Band Using 12 m Bismuth‐Doped Fiber

A 23-dB bismuth-doped optical fiber amplifier for a 1700-nm band

Novel Bismuth-doped Luminescent Materials for Super-broadband Fiber Amplifiers

321 Tb/s E/S/C/L-band Transmission with E-band Bismuth-Doped Fiber Amplifier and Optical Processor

Er 3+ /Ce 3+ Co-doped Phosphosilicate Fiber for Extend the L-band Amplification

Enhanced Highly Bismuth‐doped Multicomponent Phosphate Glass Fibers for Broadband Amplifiers

Polarization-dependent gain in bismuth-doped phospho- and germanosilicate fiber amplifiers

Bismuth-Doped Multicomponent Optical Fiber Fabricated by Melt-in-Tube Method

Exploring the potential of a bismuth-erbium-vanadium co-doped optical fiber as a stable Q-switcher in the 1550??nm region

A Low-Threshold Nonlinear-Amplifying-loop-mirror Mode-Locked Bismuth-Doped Fiber Laser Using a 3×3 Coupler

Stable Broadband Fiber-Coupled Near Infrared Light Sources Based on a Bismuth Heavily Doped Aluminosilicate Optical Fiber

Ultra‐Broadband Emission in Bi/Ge Co‐Doped Silica Glass and Fiber via Bismuth Coordination Engineering

Bismuth-activated Luminescent Materials for Broadband Optical Amplifier in WDM System