Abstract:The paper is aimed to present its methods for preparing four kinds of modified activated carbons under the different temperature conditions to protect the nitrogen atmosphere.For the research purpose,we have examined their surface physicochemical properties in a variety of approaches,such as the application of a gas adsorption analyzer,a Boehm titration,a scanning electronmicroscope (SEM) and the Fourier trans tormed infrared spectroscopy (FTIR).At the same time,we have also done the isothermal adsorption experiments under the conditions with carbaryl being used as the adsorbate.Besides,this paper has also made an exploration of the associated relation between the adsorption power and the physicochemical properties of the activated carbons.The results of the above experimental studies show that the thermal treatment of the activated carbon is in a position to change the physicochemical properties of its surface.For instance,it can promote the decrease of the oxygen content of the carbon surface and the acidic functional groups whereas the surface area and the basic composition of the activated carbons can help to increase themselves significantly,too.Moreover,the SEM analysis indicates that the pore number and volume can be found increased due to the activated carbons expansion with the rising of the temperature.What is more,the analysis results of FTIR experiment prove to be consistent with the results of the Boehm titration.In addition,the adsorption capacity of the activated carbons has been found strongly correlated with their surface area,pore volume,and the surface acidic functional groups while the oxygen content of the surface area and pore volume can help to improve the adsorption capacity of the activated carbons.On the contrary,the acidic functional groups and the oxygen content just behave oppositely.More exactly speaking,the experimental data indicate that the optimal modification temperature should be set up at 600℃.The adsorption behavior of the activated carbons has also been found consistent with the pseudo-second-order kinetic model and that of the Langmuir isotherm.And,finally,the adsorption capacity of all kinds of adsorbents proves to be greater than 8 kJ/mol,signifying that the adsorption process has been dominated by the chemical adsorption.The fitting data of the intraparticle diffusion reveals that the adsorption rate of the activated carbons is not rn()erely controlled in the liquid film diffusion stage.

Preparation and Properties of Activated Carbons with High Thermal Conductivity

New Activated Carbon with High Thermal Conductivity and Its Microwave Regeneration Performance

Effects of Thermal Activation Conditions on the Microstructure Regulation of Corncob-Derived Activated Carbon for Hydrogen Storage

Hierarchical Pore Structure of Activated Carbon Fabricated by CO2/microwave for Volatile Organic Compounds Adsorption

Synthesis of N-doped Hierarchical Porous Carbon with Excellent Toluene Adsorption Properties and Its Activation Mechanism

Preparation and Activation Mechanism of High Specific Surface Area Coal-Based Activated Carbon

Preparation and Electrochemical Properties of Coal-Based Activated Carbons

Heat Transfer Enhancement of a New Composite Adsorbent

Effects of surface modification on the porous structure and thermal-electric energy conversion of activated carbon

Preparation, characterization and adsorption performance of high surface area biomass-based activated carbons

Control of pore structure and surface chemistry of activated carbon derived from waste Zanthoxylum bungeanum branches for toluene removal in air

Preparation and performance of coal-based activated carbon based on an orthogonal experimental study

Study on the Influence of Pre-Oxidation Treatment on Surface Wettability and Supercapacitive Performance of Coal-Based Activated Carbon

Effect of high-temperature heat-treatment on the pore structure and electrod properties of activated carbon

Preparation And Characterization Of Activated Carbons From Biomass-Based Carbon Through Phosphoric Acid Activation

Adsorption of Water Vapor Onto and Its Electrothermal Desorption from Activated Carbons with Different Electric Conductivities

Design and Preparation of Activated Carbon with High Specific Surface Area and Porosity Through an Organic Activator Coupled with CO2 Activation

On the adsorptive performance of carbaryl onto the activated carbons with the thermal treatment

Novel activation process for preparing highly microporous and mesoporous activated carbons

A Comparative Study of Phenolic Resin-Based Activated Carbons by Means of Supercritical Water Activation and Steam Activation

An analysis of the carbonization process and volatile-release characteristics of coal-based activated carbon