Abstract:Nutshells are regarded as cost-effective and abundant raw materials for producing activated carbons (ACs) for CO2 capture, storage, and utilization. The effects of carbonization temperature and thermochemical KOH activation conditions on the porous structure as a BET surface, micropore volume, micropore width, and pore size distribution of ACs prepared from walnut (WNS) and hazelnut (HNS) shells were investigated. As a result, one-step carbonization at 900/800 °C and thermochemical KOH activation with a char/KOH mass ratio of 1:2/1:3 were found to be optimal for preparing ACs from WNS/HNS: WNS-AC-3 and HNS-AC-2, respectively. The textural properties of the WNS/HNS chars and ACs were characterized by low-temperature nitrogen vapor adsorption, XRD, and SEM methods. Dubinin’s theory of volume filling of micropores was used to evaluate the microporosity parameters and to calculate the CO2 adsorption equilibrium over the sub- and supercritical temperatures from 216.4 to 393 K at a pressure up to 10 MPa. The CO2 capture capacities of WNS- and HNS-derived adsorbents reached 5.9/4.1 and 5.4/3.9 mmol/g at 273/293 K under 0.1 MPa pressure, respectively. A discrepancy between the total and delivery volumetric adsorption capacities of the adsorbents was attributed to the strong binding of CO2 molecules with the adsorption sites, which were mainly narrow micropores with a high adsorption potential. The high initial differential heats of CO2 adsorption onto ACs of ~32 kJ/mol confirmed this proposal. The behaviors of thermodynamic functions (enthalpy and entropy) of the adsorption systems were attributed to changes in the state of adsorbed CO2 molecules determined by a balance between attractive and repulsive CO2–CO2 and CO2–AC interactions during the adsorption process. Thus, the chosen route for preparing ACs from the nutshells made it possible to prepare efficient carbon adsorbents with a relatively high CO2 adsorption performance due to a substantial volume of micropores with a size in the range of 0.6–0.7 nm.

Thermodynamics and Regeneration Studies of CO2 Adsorption on Activated Carbon

Modified Kinetics Model of Nano CaO Reactions with CO2 in a CaO-Based Adsorbent

Adsorption Properties of Coating Modified Nano CaO-Based CO2 Adsorbents

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Performance study of moisture swing adsorption membrane for CO_2 capture from ambient air

Kinetic Analysis of an Anion Exchange Absorbent for Co2 Capture from Ambient Air

Adsorption of Carbon Dioxide on Activated Carbon

Kinetics Studies of Co2 Adsorption/Desorption on Amine-Functionalized Multiwalled Carbon Nanotubes

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

Experiment and Kinetic Model Study on Modified Potassium-Based CO2 Adsorbent

Removal of carbon dioxide with adsorption-desorption cycling of an activated carbon bed: Effects of bed geometry and cycle parameters

Activated carbon-based CO2 uptake evaluation at different temperatures: The correlation analysis and coupling effects of the preparation conditions

Insights into the effect of regeneration temperature on physicochemical properties and SO2 removal over powdered activated coke

Superior CO2 Adsorption on Pine Nut Shell-Derived Activated Carbons and the Effective Micropores at Different Temperatures

Tuning porosity of coal-derived activated carbons for CO2 adsorption

High-pressure Carbon Dioxide Adsorption Kinetics of Potassium-Modified Hydrotalcite at Elevated Temperature

Experimental Study and Thermodynamic Analysis of Carbon Dioxide Adsorption onto Activated Carbons Prepared from Biowaste Raw Materials

Effect of Na 2 CO 3 , HF, and CO 2 Treatment on the Regeneration of Exhausted Activated Carbon Used in Sintering Flue Gas

Experimental, RSM modelling, and DFT simulation of CO2 adsorption on Modified activated carbon with LiOH