Abstract:In this study, the maleic anhydride (MAH) and styrene (St) dual monomers grafted polypropylene (PP) and poly[styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS), i.e. PP-g-(MAH-co-St) and SEBS-g-(MAH-co-St) are prepared as multi-phase compatibilizers and used to compatibilize the PA6/PS/PP/SEBS (70/10/10/10) model quaternary blends. Both PS and SEBS are encapsulated by the hard shell of PP-g-(MAH-co-St) in the dispersed domains (about 2 μm) of the PA6/PS/PP-g-(MAH-co-St)/SEBS (70/10/10/10) quaternary blend. In contrast, inside the dispersed domains (about 1 μm) of the PA6/PS/PP/SEBS-g-(MAH-co-St) (70/10/10/10) quaternary blend, the soft SEBS-g-(MAH-co-St) encapsulates both the hard PS and PP phases and separates them. With increasing the content of the compatibilizers equally, the morphology of the PA6/PS/(PP+PP-g-(MAH-co-St))/(SEBS+SEBS-g-(MAH-co-St)) (70/10/10/10) quaternary blends evolves from the soft (SEBS+SEBS-g-(MAH-co-St)) encapsulating PS and partially encapsulating PP (about 1 μm), then to PS exclusively encapsulated by the soft SEBS-g-(MAH-co-St) and then separated by PP-g-(MAH-co-St) inside the smaller domains (about 0.6 μm). This morphology evolution has been well predicted by spreading coefficients and explained by the reaction between the matrix PA6 and the compatibilizers. The quaternary blends compatibilized by more compatibilizers exhibit stronger hierarchical interfacial adhesions and smaller dispersed domain, which results in the further improved mechanical properties. Compared to the uncompatibilized blend, the blend with both 10 wt% PP-g-(MAH-co-St) and 10 wt% SEBS-g-(MAH-co-St) has the best mechanical properties with the stress at break, strain at break and impact failure energy improved significantly by 97%, 71% and 261%, respectively. There is a strong correlation between the structure and property in the blends.

Polymer blends of sPS/PA6 compatibilized by sulfonated syndiotactic polystyrene

Compatibilizing Efficiency of Copolymer Precursors for Immiscible Polymer Blends

PROPERTIES AND MORPHOLOGY OF Sps/pa6/ssps-H POLYMER ALLOY

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

A Dissipative Particle Dynamics Study on the Compatibilizing Process of Immiscible Polymer Blends with Graft Copolymers

Compatibilization of Polyamide 6/Poly(2,6-Dimethyl-1,4-phenylene Oxide) Blends by Poly( Styrene-Co-Maleic Anhydride)

COMPATIBILIZATION OF SYNDIOTATIC POLYSTYRENE/HIGHLY-IMPACT POLYSTYRENE BLENDS

Compatibilization by Sulfonate Ionomers in Polyblends with Thermotropic Liquid Crystalline Polymers

Study on sPS/PET/SsPS-H Blends

Polyamide 66/poly(2,6-dimethyl-1,4-phenylene oxide) compatibilization with styrene–acrylonitrile–glycidyl methacrylate: rheology, morphology, and mechanical properties

Correlation of Morphology Evolution with Superior Mechanical Properties in PA6/PS/PP/SEBS Blends Compatibilized by Multi-phase Compatibilizers

Synergistic Effects of Silica Nanoparticles and Reactive Compatibilizer on the Compatibilization of Polystyrene/polyamide 6 Blends

Relationship between structure and properties in high-performance PA6/SEBS-g-MA/(PPO/PS) blends: The role of PPO and PS

Grafted Syndiotactic Polystyrene Synthesized Via Melting Graft Copolymerization Used As a Compatibilizer for Immiscible Syndiotactic Polystyrene/polyadimide 66 Blends

Compatibilization of poly(2,6-dimethyl-1,4-phenylene oxide)/polyamide 6 blends with styrene-maleic anhydride copolymer: Mechanical properties, morphology, crystallization, and melting behavior

Polystyrene/High Density Polyethylene Blends Compatibilized by a Tri-Block Copolymer I. Properties and Morphology

Compatibility and mechanical properties of polyamide-6/ polystyrene/diblock poly(styrene-b-ethylene oxide) copolymer blends

Compatibilization of polypropylene/nylon 6 blends with a polypropylene solid-phase graft

Improvement of the Compatibilization of High-Impact Polystyrene/Magnesium Hydroxide Composites with Partially Sulfonated Polystyrene As Macromolecular Compatibilizers

Syndiotactic polystyrene-b-atactic polypropylene block copolymer alloy as a compatibilizer for syndiotactic polystyrene/isotactic polypropylene blends

Compatibilization of Ethylene/Maleic Anhydride/Glycidyl Methacrylate Terpolymer for Poly(Phenylene Sulfide)/Poly(Amide-66) Blends