PZT Ceramics Derived from Hybrid Method of Sol-Gel and Solid-State Reaction

RF Zhang,J Ma,LB Kong,YZ Chen,TS Zhang

DOI: https://doi.org/10.1016/s0167-577x(02)00398-1

IF: 3

2002-01-01

Materials Letters

Abstract:Lead zirconate titanate [Pb(Zr0.52Ti0.48)O3, PZT] ceramics were prepared by a hybrid method of sol-gel and solid-state reaction. Reaction of the oxides to PZT occured at a temperature as low as 500 °C, which is believed to be induced by the PZT crystallized from the sol-gel portion in the system. Fully dense PZT ceramics with 99% of the theoretic density have been achieved from the partially reacted mixture at a sintering temperature of 1100 °C for 1 h. The good dielectric (K=1030, δ=3%) and ferroelectric (Pr=24.3 μC/cm2, Ec=12 kV/cm) properties of the sintered PZT ceramic measured in the present work are in good agreement with the widely reported results of other processing techniques in the literature, indicating the practicality of the hybrid method for the preparation of PZT ceramics. It is also believed to be applicable to other materials that can be processed via sol-gel technique.