Abstract:Textile Research Journal, Ahead of Print. Yarn structure variation and property improvement have been widely investigated for applications in fancy fabric production. Thus, a novel composite yarn was fabricated by dynamically forcing strand migrations around filaments with varied tension control, regulating the geometric configuration between the filaments and staple fibers. The geometrical principle of wavy-network structure variations of novel composite yarns caused by tension interference and helical migrations between filaments and staple fibers was theoretically analyzed. Subsequently, the coordination of delivery speed ratios and untwisting factors was applied on a ring frame with a delivery roller to control the tensile difference and spiral trajectory, which oscillated the helical convergence between filaments and strands to conduct confirmatory tests.The online observations of the convergent formation in the spinning-triangle zone were technically applied to evaluate the dynamic helical migrations between strands and filaments, and the spiral structural variations of the yarn were caused by various tension difference interference and twist tracks. Experimental results revealed that the novel composite yarn had a network structure with wavy-dense wrapping, and the yarn hairiness, irregularity, tensile, and snarling properties were successively measured to compare the yarn property improvements with other composite yarns.Generally, the systematic tensile oscillation between strands and filaments in the yarn formation zone, which are produced by various delivery speed ratios and untwisting factors, are promising as a novel method for controlling the helical configurations and inter-stress between filaments and staple strands.

Processing Configuration of Superfine Heavy Twist Ply in Preparation Process

Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

Twisting in improving processing of waste-derived yarn into high-performance reinforced composite

Pretreatment Process of Polylactic Acid / Richcel / Bamboo Fiber Blended Fabric

Difficulty and Resolving Measures in Producing Heavy Composite Fabric

An Experiment on Drying,Cooking and Reeling Cocoons of Ultrafine Filament

Established an eco-friendly cotton fabric treating process with enhancing anti-wrinkle performance

Research on Spinnability of 55 Dtex/36 F Superfine Lobed PET/PA Composite DTT

One bath pretreatment of PLA/Richcel/bamboo fiber blended fabric

Processing Practice of Rubber-covered Roll Forward Motion Draft in Spinning Frame

DEVELOPMENT OF THE FAR-INFRARED POLYESTER/BAMBOO FIBER/ACRYLIC BLENDED KNITTING YARNS

Production practice of 9.8tex cocoa charcoal modified polyester/cotton/Coolplus compact yarn

Research on twists in core and sheath layers of staple core-spun yarn produced by coaxial roller with different diameters

Optimization of the Production Process of Flash-Spinning UHMWPE Superfine Fiber by Response Surface Methodology

Discussion of Warp and Weft Twist Direction Matching Effect on Cotton Fabric Texture Property

Modification of yarn wrapping technology for natural-based textiles with highly efficient wicking and fast-drying performances

Using an eco-friendly cold pad-batch reduction pretreatment to improve the whiteness, hydrophilicity, and anti-shrinkage of wool fabric

Effect of processing parameters on friction and damage of carbon yarn during three-dimensional weaving

Effect of Coagulation Bath Concentration on the Structure and Properties of Polyacrylonitrile As-Spun Fibers During Wet-Spinning

Novel composite yarn with a wavy-network structure produced by various delivery speed ratios and untwisting factors

Enhancing the Spun Yarn Properties by Controlling Fiber Stress Distribution in the Spinning Triangle with Rotary Heterogeneous Contact Surfaces