Abstract:Ultrahigh molecular weight polyethylene (UHMWPE) fibers have been investigated for years to improve performance with gel spinning process for wide applications in industry. Various spin solvents have been attempted including paraffin oil, decahydronaphthalene (decalin), kerosene etc. However, more work still needs to be done because of environmental issues or long extraction process of the aforementioned solvents. Recently, polybutene was found to be an effective spin solvent for UHMWPE fibers, which is environmentally friendly and widely available on the market. Besides producing high strength fibers, compared to paraffin oil, polybutene can form a gel with UHMWPE showing stronger phase separation behavior at room temperature. Because of this property, more extraction solvents can be saved. It was also demonstrated with experiments that the extraction efficiency is higher than that of the gel fiber formed with paraffin oil. Thus, polybutene has high potential to be used in large-scale production of UHMWPE fibers, which deserves further study. In this work, polybutene with different molecular weight was used to form spin dopes with UHMWPE. The dope concentration for each type of polybutene was also varied to check the effect of molecular weight and dope concentration on fiber properties. Viscoelastic properties of the spin dopes were obtained with parallel plate rheometry while thermodynamic properties of the dopes were characterized with differential scanning calorimetry (DSC) and thermal gravitational analysis (TGA). With optimized processing conditions, high strength fibers were collected and the crystalline structure was examined with wide angel X-ray diffraction (WAXD). DSC and TGA data also provided support for the effect of molecular weight and concentration of polybutene. It can be found that stronger fibers are obtained with lower concentration spin dopes. The viscosity of the dopes and corresponding spinning conditions are significantly affected by molecular weight of polybutene. Extraction efficiency is affected by both molecular weight and dope concentration. To obtain cost-effective superstrong UHMWPE fibers, an optimized design is needed based on the molecular weight of polybutene and the spin dope concentration.

Optimization of the Production Process of Flash-Spinning UHMWPE Superfine Fiber by Response Surface Methodology

Effect of Molecular Weight and Concentration on Gel-Spun UHMWPE Fibers with Polybutene As a New Spin Solvent

Optimization for softing refining process of kenaf fiber with alkali and hydrogen peroxide in one step

Optimization of hot drawing process of ultra‐high molecular weight polyethylene monofilament prepared by melt spinning

Gel Spinning of Uhmwpe Fibers with Polybutene As A New Spin Solvent

Optimization of melt-spinning parameters of poly(ethylene terephthalate) partially oriented multi-filament yarn in an industrial scale: Central composite design approach

Finite Element Simulation Of The Flow In The Spinneret Hole For Uhmwpe Melt Spinning

Preparation and characterization of EPDM ultrafine fibers by electrospinning

The Optimization of Process Parameters and Characterization of High-Performance CF/PEEK Composites Prepared by Flexible CF/PEEK Plain Weave Fabrics

Feedback System Control Optimized Electrospinning for Fabrication of an Excellent Superhydrophobic Surface

Response Surface Methodology to Explore the Influence Mechanism of Fiber Diameter in a New Multi-Needle Electrospinning Spinneret

Research on Spinnability of 55 Dtex/36 F Superfine Lobed PET/PA Composite DTT

Mesoscopic Simulation of Centrifugal Melt Electrospinning of PPESK

Enhancing Gel Spinning of Ultra-High Molecular Weight Polyethylene: Insights into Rheology and Microstructure

Numerical Simulation and Experimental Verification of Melt-Spinning Parameters' Effects on Multi-Leaf Hollow-Profiled Fiber Preparation

Study on Structures and Properties of Ultra-Hot Drawing UHMWPE Fibers Fabricated Via Dry Spinning Method

The influence of formation temperatures on the crystal structure and mechanical properties of ultrahigh-molecular-weight polyethylene/high-density polyethylene-blend fibers prepared by melt spinning

Effective Modeling and Optimization of PVDF–PTFE Electrospinning Parameters and Membrane Distillation Process by Response Surface Methodology

Effective Method for High-Throughput Manufacturing of Ultrafine Fibres Via Needleless Centrifugal Spinning

Studies on the Melt Spinning Process of Noncircular Fiber by Numerical and Experimental Methods

An important measure for improving the spinnability of PET melt direct spinning