Abstract:Ultrahigh molecular weight polyethylene (UHMWPE) fibers have been investigated for years to improve performance with gel spinning process for wide applications in industry. Various spin solvents have been attempted including paraffin oil, decahydronaphthalene (decalin), kerosene etc. However, more work still needs to be done because of environmental issues or long extraction process of the aforementioned solvents. Recently, polybutene was found to be an effective spin solvent for UHMWPE fibers, which is environmentally friendly and widely available on the market. Besides producing high strength fibers, compared to paraffin oil, polybutene can form a gel with UHMWPE showing stronger phase separation behavior at room temperature. Because of this property, more extraction solvents can be saved. It was also demonstrated with experiments that the extraction efficiency is higher than that of the gel fiber formed with paraffin oil. Thus, polybutene has high potential to be used in large-scale production of UHMWPE fibers, which deserves further study. In this work, polybutene with different molecular weight was used to form spin dopes with UHMWPE. The dope concentration for each type of polybutene was also varied to check the effect of molecular weight and dope concentration on fiber properties. Viscoelastic properties of the spin dopes were obtained with parallel plate rheometry while thermodynamic properties of the dopes were characterized with differential scanning calorimetry (DSC) and thermal gravitational analysis (TGA). With optimized processing conditions, high strength fibers were collected and the crystalline structure was examined with wide angel X-ray diffraction (WAXD). DSC and TGA data also provided support for the effect of molecular weight and concentration of polybutene. It can be found that stronger fibers are obtained with lower concentration spin dopes. The viscosity of the dopes and corresponding spinning conditions are significantly affected by molecular weight of polybutene. Extraction efficiency is affected by both molecular weight and dope concentration. To obtain cost-effective superstrong UHMWPE fibers, an optimized design is needed based on the molecular weight of polybutene and the spin dope concentration.

Investigation of the Extraction Process in Gel‐spinning Technology for Ultrahigh‐molecular‐weight Polyethylene Fibers by Low‐field Nuclear Magnetic Resonance

Mass Transfer Enhancement in Non‐dispersive Solvent Extraction with Helical Hollow Fiber Enabling Dean Vortices

Studies on Nonisothermal Crystallization of Ultra–high Molecular Weight Polyethylene in Liquid Paraffin

Effect of Molecular Weight and Concentration on Gel-Spun UHMWPE Fibers with Polybutene As a New Spin Solvent

Enhancing Gel Spinning of Ultra-High Molecular Weight Polyethylene: Insights into Rheology and Microstructure

Gel Spinning of Uhmwpe Fibers with Polybutene As A New Spin Solvent

Gelation/crystallization Mechanisms of UHMWPE Solutions and Structures of Ultradrawn Gel Films

Fibers of Ultra-High Molecular Weight Polyethylene Obtained by Gel Spinning with Polyalphaolefin Oil

Dissolving of Ultra-high Molecular Weight Polyethylene Assisted Through Supercritical Carbon Dioxide to Enhance the Mechanical Properties of Fibers

Rheological Properties of UHMWPE/HDPE Blend Gels and Morphology and Mechanical Properties of Gel‐spun Fibers

Structure Evolution Of Ultra High Molecular Weight Polyethylene/Montmorillonite Nanocomposite Fibers Prepared By Melt Spinning

Twist-film Gel Spinning of Large-Diameter High-Performance Ultra-High Molecular Weight Polyethylene Monofilaments

Effects of the Extractant on the Hydrophilicity and Performance of High-Density Polyethylene/Polyethylene-B-Poly(Ethylene Glycol) Blend Membranes Prepared Via A Thermally Induced Phase Separation Process

The rheology of ultra-high molecular weight poly(ethylene oxide) dispersed in a low molecular weight carrier

Rheological Behavior of Ultrahigh Molecular Weight Polyethylene/low‐density Polyethylene Blending Gels with High Solid Content

The effect of shrinkage on the structure and properties of ultra‐high molecular weight polyethylene fibers with different concentration

Structure and Properties of Gel‐spun Ultra‐high Molecular Weight Polyethylene Fibers Obtained from Industrial Production Line

Preparation of PAN@PU coaxial electrostatic spun nanofibers for oil/water separation

Dissipative Particle Dynamics and Flory−Huggins Theories for Predicting the Rheological Behavior of Ultrahigh Molecular Weight Polyethylene Blends

Two‐stage Drawing Process to Prepare High‐strength and Porous Ultrahigh‐molecular‐weight Polyethylene Fibers: Cold Drawing and Hot Drawing

Effect of gamma ray irradiation on processability and properties of ultra high molecular weight polyethylene