Abstract:90°C is considered as the most suitable drawing temperature for PTT and PA56 fibers. At this drawing temperature, the tenacity of PTT or PA56 matrix fibers can be improved by adding low content of another polymer. Among these blend fibers, PTT/PA56 (10/90) blend fiber achieves the best combination of tensile properties and dimensional stability. Melt‐spun poly(trimethylene terephthalate) (PTT) and polyamide 56 (PA56) fibers are generally prepared individually. Herein, inspired by the complementary properties of these two materials, PTT/PA56 blend fibers were prepared by two‐step melt spinning and drawing processes. The regularity of crystalline regions, overall orientation in crystalline and amorphous regions, and dimensional stability under hot and humid conditions can be improved by increasing drawing temperature. The most suitable drawing temperature is 90°C, at which 4‐fold drawn PTT and PA56 fibers show tenacity of 2.94 and 3.54 cN/dtex, respectively. An increase in draw ratio leads to increase in the order of crystal regions and overall orientation in crystalline and amorphous phases. Interestingly, increasing dispersed phase content from 0 to 10 wt% is conducive to the increase in tenacity of samples. The PTT/PA56 (10/90) blend fiber suggests the maximum tenacity value, and tenacity of 4‐fold drawn fiber is 4.02 cN/dtex. As PA56 content increases, dimensional stability of samples under dry conditions increases. Comprehensive analysis demonstrates that the PTT/PA56 (10/90) blend fiber achieves the best combination of tensile properties and dimensional stability. The prepared PTT/PA56 blend fibers are potentially competitive in the fields of fibers, garment, and decoration due to their satisfactory comprehensive performances.

Research on Spinnability of 55 Dtex/36 F Superfine Lobed PET/PA Composite DTT

Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

Influence of Selection of Extruders on the Processing of Recycled PET Flakes

Effect of drawing and heat‐setting process on aggregate structure of Poly(ethylene terephthalate) industrial fiber in large‐scale spinning production

Optimization of the Production Process of Flash-Spinning UHMWPE Superfine Fiber by Response Surface Methodology

New bio-based polyester with excellent spinning performance: poly(tetrahydrofuran dimethanol-co-ethylene terephthalate)

Study on the synthesis and properties of silk-like copolyester

Development of Water Soluble PBT and Superfine Fibers Thereof

Optimization of hot drawing process of ultra‐high molecular weight polyethylene monofilament prepared by melt spinning

Melt spining – a special process of thermoplastic processing and structure formation

The Influence of Drawing Pressure on the Properties of Pet/Pa6 Bicomponent Spunbonded Fibers

Poly(ethylene Terephthalate)/carbon Black Composite Fibers Prepared by Electrospinning

Preparation of Conductive Polyester Fiber Compounded with Carbon Black

The influence of formation temperatures on the crystal structure and mechanical properties of ultrahigh-molecular-weight polyethylene/high-density polyethylene-blend fibers prepared by melt spinning

Study on electrospinnability of PVP/PEO composite micro-nano fibers

Bio‐based poly(trimethylene terephthalate)/polyamide 56 blend fibers via melt spinning: Preparation, structure, and properties

Development of Sheath-Core Oxygen Anionic Polyester Filament

Structure and Rheological Behavior of PET/WSPET Blend

Study on the spinnability and mechanical properties of aspirator aided melt‐spun binary blends polypropylene fibers

Numerical Simulation and Experimental Verification of Melt-Spinning Parameters' Effects on Multi-Leaf Hollow-Profiled Fiber Preparation

Supercritical fluid dyeing of polyester fabrics using polymeric nanofibers loaded with disperse dye