Abstract:The stress distribution in prestressed filament wound components plays a crucial role in determining the quality of these components during their operational lifespan. This article proposes a physical model to analyze the stress and deformation of prestressed wound composite components with arch-shaped sections. Drawing upon the principles of beam theory, we delve into the analysis of prestressed wound components with metal liners featuring arch-shaped sections. Our investigation revealed a noteworthy phenomenon termed the "additional bending moment effect" within prestressed wound components with arch-shaped sections. Furthermore, this study establishes a relationship between this additional bending moment and the external pressure. In addition, a 3D finite element (FE) model for prestressed wound components with arch-shaped sections incorporating metal liners was developed. The model's accuracy was validated through a comparison with prestressed wound experiments, showcasing an error margin of less than 2%. In comparison with prestressed wound components with circular cross-sections under identical load and dimensional parameters, it was observed that prestressed wound components with arch-shaped sections exhibit stress distributions in the arc segments akin to their circular counterparts, with differences not exceeding 5%. Notably, when the ratio of the straight segment length to the inner diameter of the arc segment inner is less than 4, the deformation on the symmetric plane of the arc segment in an arch-shaped component can be effectively considered as the summation of deformations in equivalent-sized arc and straight segments under identical loading conditions. This yields an equivalent physical model and a streamlined analysis and design methodology for describing the deformation characteristics of prestressed wound components with arch-shaped sections.

Finite element analysis of the prestress wire-winding press

Mechanical Analysis of Carbon Fiber Wound High Pressure Hydrogen Storage Vessel and Prestress Control in Manufacturing Process

CONTROLLABLE STRESS ANALYSIS AND DESIGN OF FLAT STEEL RIBBON WOUND PRESSURE VESSEL

Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method

Analysis on the Winding Process of Pre-Stressed Wire Wound Orthogonal Preload Frame on the Basis of Finite Element

The Application of Pre-stressed Wire Wound Technique on the Forge/Extrusion Presses

The Research of Wire Winding on the Ultra-heavy Prestressed Frame

Finite Element Analysis of Superconducting Magnet Winding Pre-stress

Experimental Study and Finite Element Analysis on the Frame of Multi-Directional Forging Press

Finite Element Analysis of a Flexible Ferris Wheel

Effect of Induction Heat Treatment on Residual Stress Distribution of Components Fabricated by Wire Arc Additive Manufacturing

Numerical analysis of process induced stress field for composite filament wound vessel with metal liner

Numerical Analysis and Design of Concrete-Filled Wire Arc Additively Manufactured Steel Tube under Axial Compression

Spatial Simulating Analysis Of Prestressing Force Effect Of Long Span Prestressed Concrete Box Girder Bridge

Structural analysis of plate-type hydroforming hydraulic press

Stress and Deformation Analysis of Prestressed Wound Composite Components with an Arch-Shaped Metal Liner

Finite element methods used in clinching process

Finite Element Analysis for 40 Mn Die Forging Press

Finite Element Analysis of Stress and Strain Field in Thin-wall Taper Workpiece During Spinning Forming

Analysis on strength and stiffness of high pressure hydro-forming press with short stroke and fully pre-stressed assembled frame

Finite element synthesized analysis of the forming process of spiral welded pipe