Abstract:2.25Cr-1Mo-0.25 V steel has been widely used to manufacture hydro-processing equipment operating under harsh environments for its good creep performance. Warm bending, a common fabricating process of 2.25Cr-1Mo-0.25 V steel ring shells, inevitably changes the creep property of 2.25Cr-1Mo-0.25 V steel, but its detailed effect still remains obscure. In this work, we experimentally investigated the impact of warm bending on the microstructure and creep behavior of 2.25Cr-1Mo-0.25 V steel. First, a series of creep rupture tests were carried out at 482 °C and 350 MPa, in which test materials were extracted from an actually fabricated ring shell and its raw plate. Thereafter, the microstructures of test materials were semi-quantitatively analyzed by various characterization techniques, such as electron backscatter diffraction (EBSD) and three-dimensional high-resolution X-ray computed tomography (3D μ-XCT). Finally, warm forming induced microstructural degradation as well as their implication for creep was discussed in detail. Creep rupture tests showed that warm bending leads to a significant decrease in creep lifetime at the surface region of virgin plate but a slight decline at the central region of virgin plate. An inhomogeneous creep resistance distribution was thereby revealed along the thickness direction of the ring shell, which could not be completely eliminated by subsequent tempering at 705 °C for 8 h. Moreover, microstructural observations demonstrated that warm deformation leads to multiple microstructural deterioration, including carbide coarsening, ferrite matrix softening, void defect increasing, etc. Their combined action appears to accelerate the creep fracture behavior of 2.25Cr-1Mo-0.25 V steel. This work will contribute to the long-term safety and integrity assessment of 2.25Cr-1Mo-0.25 V steel structures. Graphical abstract

The Application of Pre-stressed Wire Wound Technique on the Forge/Extrusion Presses

Stress Intensity Factors for Cracked Cold-drawnSteel Wires under Tensile Loading

Analysis on the Winding Process of Pre-Stressed Wire Wound Orthogonal Preload Frame on the Basis of Finite Element

Finite Element Analysis of Steel Wire Ropes Considering Creep and Analysis of Influencing Factors of Creep

Finite element analysis of the prestress wire-winding press

Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method

Research on Pre-stressed Steel Wires Which is Applied to Heavy Equipments

Experimental Study and Finite Element Analysis on the Frame of Multi-Directional Forging Press

The Research of Wire Winding on the Ultra-heavy Prestressed Frame

Pillar and Arched Girder Totally Bumpy Ridge Joining Frame with Steel Wire Wound

Study on the Concave-shaped Semicircular Beam of Pre-stressed Steel Wire-wound Frame

THERMAL STRESS ANALYSIS ON WIRE WINDED SUBDIVIDED-COMBINED LARGE EXTRUSION CONTAINER

KEY TECHNOLOGIES OF MODERN HEAVY DIE FORGING PRESS

The Development of Bearing Structure in Heavy Die Forging Hydraulic Press

The Basic Principles of the Prestressed Bumpy-ridge Structure with Steel Wire Wound

Revealing influence of warm bending on creep performance of heat-resistant 2.25Cr-1Mo-0.25 V steel

Effect of Induction Heat Treatment on Residual Stress Distribution of Components Fabricated by Wire Arc Additive Manufacturing

Applied analysis of pressure die technique on contact wire in high speed railway line

Design on moving beam of multi-functional forging-extrusion press 680 MN

Multi-ram Forge Process and Its Equipment Development

RESEARCH ON WIRE-DRAWING OF A H0Cr17Ni6Mn3 STEEL WITH HIGH-DENSITY CURRENT PULSES