Abstract:Building upon the analytical study of the structural configuration and prestress state of the drum-shaped quad-strut cable dome, we conducted further investigation into its structural configuration. By employing the nodal equilibrium equations to solve the prestress state analysis of the cable dome, we compared the effects of two different cable laying methods on the prestress state of the cable dome structure. These methods include equal length of the radial horizontal projection of the upper chord ridge cables and equal radial chord length of the upper chord ridge cables. The analysis results show that the radial length of the top chord and its corresponding radial horizontal projection length of the cable dome structure can effectively reflect the trend of the prestress state of the structural configuration. Furthermore, by using a rise-to-span ratio of 0.11 as a threshold, the cable dome configuration is categorized into the flat spheroidal structural configuration and the small hemispheroidal structural configuration. When the structure is analyzed using a small rise-to-span ratio, the difference in prestress calculations between the two structural configurations is found to be less than 10%. Additionally, the structure exhibits a more uniform distribution of prestress, with the prestress gradually increasing from the inner circle to the outer circle. However, when the rise-to-span ratio increases, the difference between the prestress calculation results of the two configurations also increases, emphasizing the need to deploy upper chord ridge cables based on equal radial chord lengths (arc lengths). The research presented in this paper provides a novel insight into the structural topological form and prestress state calculation of cable domes with this configuration.

Study on the Concave-shaped Semicircular Beam of Pre-stressed Steel Wire-wound Frame

Analytical Study of Structural Conformation and Prestressing State of Drum-Shaped Honeycomb Quad-Strut Cable Dome Structure with Different Calculation Methods

Experimental Study on Self-Centering Link Beams Using Post-Tensioned Steel-Sma Composite Tendons

RESEARCH ON FLEXURAL PERFORMANCE OF DOUBLE-STEEL REINFORCED CONCRETE BEAM

Prestress design of spatial cable-truss tensile structures with annular plane

Pre-stress Test for Steel Wire Wound Moving Beam of Heavy Forging Press Based on Finite Element Method

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Analysis on the Winding Process of Pre-Stressed Wire Wound Orthogonal Preload Frame on the Basis of Finite Element

Research on Strength and Deformation Characteristics of Unbonded Prestressed Concrete Beams

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Experimental Study and Finite Element Analysis on the Frame of Multi-Directional Forging Press

Pillar and Arched Girder Totally Bumpy Ridge Joining Frame with Steel Wire Wound

Research on Rational Post Successive Prestress Tension Sequence of Simply Supported and Continuous Box Girder Bridge

Integrity Analysis of Bumpy-ridge Beam in the Pre-stressed Wire Winded Framework

Analysis on Longitudinal Crack Along the Bottom Slab of the Pre-stressed Wire of Thin-wall Box-structure

The Research of Wire Winding on the Ultra-heavy Prestressed Frame

Finite element analysis of the prestress wire-winding press

Design on moving beam of multi-functional forging-extrusion press 680 MN

A Novel Rectangular-Section Combined Beam of Welded Thin-Walled H-Shape Steel/Camphor Pine Wood: The Bending Performance Study

Deformation Measurement Based on Digital Image Correlation and Finite Element Analysis Based on Cooling Method of Heavy Hydraulic Press Frame

Behavior of A Simple Concrete Beam Driven by Shape Memory Alloy Wires