Abstract:Innovative research on the development of thermal control films for spacecraft surfaces is presented. A hydroxy-terminated random copolymer of dimethylsiloxane–diphenylsiloxane (PPDMS) was prepared from hydroxy silicone oil and diphenylsilylene glycol by a condensation reaction, and then liquid diphenyl silicone rubber base material (denoted as PSR) was obtained by adding hydrophobic silica. Microfiber glass wool (MGW) with a fiber diameter of ∼3 μm was added to the liquid PSR base material, which upon solidifying at room temperature, formed a 100 μm thick PSR/MGW composite film. The infrared radiation properties, solar absorption, thermal conductivity, and thermal dimensional stability of the film were evaluated. Moreover, the dispersion of the MGW in the rubber matrix was confirmed by optical microscopy and field-emission scanning electron microscopy. The PSR/MGW films exhibited a glass transition temperature of −106 °C, thermal decomposition temperature exceeding 410 °C, and low α / ε values. The homogeneous distribution of MGW in the PSR thin film resulted in a notable reduction in its linear expansion coefficient, as well as its thermal diffusion coefficient. Consequently, it exhibited a significant capacity for thermal insulation and retention. For the sample with 5 wt% of MGW, the linear expansion coefficient and thermal diffusion coefficient at 200 °C were reduced to 0.53% and 2.703 mm s −2 , respectively. Thus, the PSR/MGW composite film has good heat-resistance stability and low-temperature endurance, along with low α / ε values and excellent dimensional stability. Additionally, it facilitates effective thermal insulation and temperature control, and can be an ideal material for thermal control coatings on spacecraft surfaces.

Effects of water content and sol viscosity on morphology of porous silica thermal insulating layer

The Effects of Microstructure on Optical and Thermal Properties of Porous Silica Films

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Effects of Coating Methods on Microstructure and Optical Properties of Mesoporous Silica Films

Microstructure and Properties of Organosoluble Polyimide/silica Hybrid Films

Preparation of Methyltrimethoxysilane Derived Silica Aerogel Films via Ambient Pressure Drying

Fourier transform infrared spectroscopy and oxygen luminescence probing combined study of modified sol–gel derived film

Synthesis of porous silica gel and study on the adsorption of cerium

Effect of organic hydrophobic groups on the pore structure and thermal properties of waterglass-based silica xerogels

The Effect of Water Content on the Preparation of Mesoporous Monoliths and Films

Influence of water contents on structure and properties of SiO 2-PEDT composite antistatic thin film by sol-gel process

High-temperature microtexture, microstructure evolution, and thermal insulation properties of porous Si3N4/silica aerogel composites produced by impregnation

Synthesis and Characterization of Hydrophobic Silica Thin Layer Derived from Methyltrimethoxysilane (MTMS)

Preparation and characterization of diphenyl silicone rubber/microfiber glass wool composite thermal control films

Effects of Substrate Temperature on the Properties of Silicon Oxide Films by PECVD

Preparation and properties of thermal insulation coating based on silica aerogel

Investigation Of Thickness Dependence Of Structure And Electric Properties Of Sol-Gel-Derived Bisco3-Pbtio3 Thin Films

Porous Ysz Ceramics with Unidirectionally Aligned Pore Channel Structure: Lowering Thermal Conductivity by Silica Aerogels Impregnation

Fabrication and characterization of Aerogel-Polydimethyl siloxane (PDMS) Insulation Film

Comparison of Hybrid Polyimide Films with Silica and Organosilica Obtained Via Sol–gel Process