Abstract:Pinhole drying process is a slowly dryness in the air caused by capillary force. It was found useful to improve the transparency of silica aerogel. So in this work, pinhole drying was considered as a modification on the microstructure. We studied the effect of pinhole drying on the light transmission of aerogel. The effect of pinhole drying on the microstructure of aerogel was also investigated. The spherical transmittance (τ s) and directional transmittance (τ d) were measured by ultraviolet–Visible–infrared spectrophotometer, the scattering light at the 90° direction of the gel was measured by a nephelometer, and the microstructure of the aerogels were analyzed applying small angle X-ray scattering, nitrogen adsorption porosimetry, and scanning electron microscope. The results showed that pinhole dried silica aerogels and non-pinhole dried aerogels exhibited different microstructure and optical properties. The directional transmittance of the pinhole dried aerogel and non-pinhole dried aerogel at 600 nm wavelength was 57.9 and 40.9%, respectively, an improvement of 17.0%. The transparency ratio (τ d/τ t) of pinhole dried aerogel and non-pinhole dried aerogel at 400 nm wavelength was 0.26 and 0.07, respectively, an improvement of 0.19. Small angle X-ray scattering measurements showed that these improvements can be attributed to the smaller mean cluster size of pinhole dried aerogels than that of non-pinhole dried aerogels. 90° scattering light experiments indicated that the clusters of the gel were becoming smaller during the drying process caused by capillary force according to Rayleigh scattering theory. It is the reason why pinhole dried aerogels have smaller mean cluster size and relatively transparent.

The Effects of Microstructure on Optical and Thermal Properties of Porous Silica Films

Effects of Coating Methods on Microstructure and Optical Properties of Mesoporous Silica Films

Exploring The Effect Of Porous Structure On Thermal Conductivity In Templated Mesoporous Silica Films

Characteristics of laser-densified and conventionally heat treated sol–gel derived silica–titania films

Preparation of multilayer coated glass with low-E and thermal insulation properties

Effects of the Addition Amount of Silica Aerogels on Mechanical Properties and Microstructure of Insulating Materials

Thermal Conductivity of Silica Aerogel Thermal Insulation Coatings

Tailoring structure and properties of silica aerogels by varying the content of the Tetramethoxysilane added in batches

EFFECT OF EXPERIMENTAL CONDITIONS ON THE STRUCTURE AND PROPERTIES OF NANO-POROUS SILICA FILMS

Controlling Thermal Conductivity in Mesoporous Silica Films Using Pore Size and Nanoscale Architecture

Effects of Experimental Conditions on the Properties of Nanoporous Silica Films

Effect of SiO2 Aerogel on the Performance of Composite Insulation Coating

Studies on Thermal Property of Silica Aerogel/Epoxy Composite

Microstructure Control of the Silica Aerogels Via Pinhole Drying

Experimental Study of the Influence of Additives on the Thermal Conductivity of Silica Aerogel Composite

Experimental Characterization of the Thermal Conductivity and Microstructure of Opacifier-Fiber-Aerogel Composite

Effect of Thermal Process on Microstructure and Physical Properties of Silica Aerogels

Effects of water content and sol viscosity on morphology of porous silica thermal insulating layer

Microstructure Control of Nanoporous Silica Thin Film Prepared by Sol-Gel Process

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold

Toward Improved Optical Transparency of Silica Nanofibrous Aerogels