Abstract:Publication date: 10 January 2022 Source: Solid State Phenomena Vol. 327 Author(s): Jiehua Li, Maria Pammer, Ernst Neunteufl, Peter Schumacher AZ80 alloy has been widely used to produce high performance Mg casting and wrought parts for high-end applications due to its high mechanical properties and deformation ability. However, at least two important issues still need to be solved in order to further improve its mechanical properties and deformation ability. Firstly, the grain size of α-Mg in AZ80 alloy is relatively large (more than 1000 μm) due to a lack of efficient grain refinement methodologies. Secondly, the size of the eutectic Mg17Al12 phase is also large and the distribution of the eutectic Mg17Al12 phase is continuous, which is very harmful for the mechanical properties, in particular to elongation. In this paper, these two important issues are investigated by adding Mg3N2 sub-micron particle into AZ80 alloy and thereby refining the α-Mg and the eutectic Mg17Al12 phase. Firstly, the Mg3N2 sub-micron particle was directly added into AZ80 alloy by using mechanically stirring in the semi-solid state, subsequently the melting temperature was increased above the liquidous temperature, and finally the melting was casted in the liquid state. It was found that the grain size of α-Mg can be refined from 883.8 μm to 169.9 μm. More importantly, the eutectic Mg17Al12 phase was also refined and the distribution became discontinuous. It should be noted that directly adding the Mg3N2 sub-micron particle into AZ80 alloy leads to a great loss of the Mg3N2 sub-micron particle due to the weak wetting behavior between the Mg3N2 sub-micron particle and Mg melt. The second methodology through mixing Mg3N2 sub-micron particles with AZ91 chips using a twin extruder was also used to prepare AZ91 master alloy with 3wt.% Mg3N2 sub-micron particle, which was subsequently added into AZ80 alloy in the liquid state. In this way, a significant grain refinement of α-Mg and a simultaneous refinement of the eutectic Mg17Al12 phase in AZ80 alloy was also achieved. The grain size of α-Mg can be refined from 883.8 μm to 325.9 μm. However, no significant grain refinement by using UST was observed. Instead, the grain size increases from 325.9 μm to 448.6 μm, indicating that the Mg3N2 sub-micron particle may lose its grain refinement potency due to possible aggregation and clustering. This paper provides an efficient and simple methodology for the grain refinement of α-Mg and the simultaneous refinement of the eutectic Mg17Al12 phase in AZ80 alloy.

Shear Enhanced Heterogeneous Nucleation in AZ91D Alloy

Enhanced Heterogeneous Nucleation in Az91d Alloy by Intensive Melt Shearing

Shear Enhanced Heterogeneous Nucleation in Some Mg- and Al-alloys

Grain Refinement in A Alznmgcuti Alloy by Intensive Melt Shearing: A Multi-Step Nucleation Mechanism

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

The Effect of Al8Mn5 Intermetallic Particles on Grain Size of As-Cast Mg–Al–Zn AZ91D Alloy

Nanocrystalline AZ91 Alloy: Preparation, Exceptional Thermal Stability and Enhanced Hardness

Developing a high-speed-extruded BMZQ5100 alloy with higher strength and microstructural thermal stability than AZ91 alloy

Enhanced grain refinement and mechanical properties of AZ91 alloy by a novel Al-5.1V-2.3B refiner containing VB 2 and VB particles

REFINEMENT OF SOLIDIFICATION MICROSTRUCTURE BY MCAST PROCESS

Effective Inhibition of Anomalous Grain Coarsening in Cast AZ91 Alloys During Fast Cooling Via Nanoparticle Addition

Effect of the Mg3N2 Sub-Micron Particle on the Grain Refinement of AZ80 Alloy

Microstructural Evolution of Previously Deformed Az91d Magnesium Alloy During Partial Remelting

Refining Grain Structure and Porosity of an Aluminium Alloy with Intensive Melt Shearing

Enhanced Heterogeneous Nucleation in Al Alloys by Melt Ultrasonic Treatment

Influences of Melt Treatment on Grain Sizes and Morphologies of Az91d Alloy

Nanoparticle-induced Growth Behavior of Primary Α-Mg in AZ91 Alloys

Effect of Pouring Temperature During a Novel Solid–liquid Compound Casting Process on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy Parts with Arc-Sprayed Aluminum Coatings

Nanoscale Precipitates with Quasicrystal Domains Enhanced Strength-Ductility Synergy in a Mg–6Zn–4Al–1Sn–0.5Mn Alloy

Microstructure Evolution and Mechanical Properties of AZ80 Mg Alloy during Annular Channel Angular Extrusion Process and Heat Treatment

Study on the Applications of Structure Heredity of AZ91D Alloy