Abstract:Publication date: 10 January 2022 Source: Solid State Phenomena Vol. 327 Author(s): Jiehua Li, Maria Pammer, Ernst Neunteufl, Peter Schumacher AZ80 alloy has been widely used to produce high performance Mg casting and wrought parts for high-end applications due to its high mechanical properties and deformation ability. However, at least two important issues still need to be solved in order to further improve its mechanical properties and deformation ability. Firstly, the grain size of α-Mg in AZ80 alloy is relatively large (more than 1000 μm) due to a lack of efficient grain refinement methodologies. Secondly, the size of the eutectic Mg17Al12 phase is also large and the distribution of the eutectic Mg17Al12 phase is continuous, which is very harmful for the mechanical properties, in particular to elongation. In this paper, these two important issues are investigated by adding Mg3N2 sub-micron particle into AZ80 alloy and thereby refining the α-Mg and the eutectic Mg17Al12 phase. Firstly, the Mg3N2 sub-micron particle was directly added into AZ80 alloy by using mechanically stirring in the semi-solid state, subsequently the melting temperature was increased above the liquidous temperature, and finally the melting was casted in the liquid state. It was found that the grain size of α-Mg can be refined from 883.8 μm to 169.9 μm. More importantly, the eutectic Mg17Al12 phase was also refined and the distribution became discontinuous. It should be noted that directly adding the Mg3N2 sub-micron particle into AZ80 alloy leads to a great loss of the Mg3N2 sub-micron particle due to the weak wetting behavior between the Mg3N2 sub-micron particle and Mg melt. The second methodology through mixing Mg3N2 sub-micron particles with AZ91 chips using a twin extruder was also used to prepare AZ91 master alloy with 3wt.% Mg3N2 sub-micron particle, which was subsequently added into AZ80 alloy in the liquid state. In this way, a significant grain refinement of α-Mg and a simultaneous refinement of the eutectic Mg17Al12 phase in AZ80 alloy was also achieved. The grain size of α-Mg can be refined from 883.8 μm to 325.9 μm. However, no significant grain refinement by using UST was observed. Instead, the grain size increases from 325.9 μm to 448.6 μm, indicating that the Mg3N2 sub-micron particle may lose its grain refinement potency due to possible aggregation and clustering. This paper provides an efficient and simple methodology for the grain refinement of α-Mg and the simultaneous refinement of the eutectic Mg17Al12 phase in AZ80 alloy.

Nanoparticle-induced Growth Behavior of Primary Α-Mg in AZ91 Alloys

Nanoparticle-inhibited Growth of Primary Aluminum in Al–10Si Alloys

Effective Inhibition of Anomalous Grain Coarsening in Cast AZ91 Alloys During Fast Cooling Via Nanoparticle Addition

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

The Influence of Nanoparticles on Dendritic Grain Growth in Mg Alloys

Effect of the Mg3N2 Sub-Micron Particle on the Grain Refinement of AZ80 Alloy

Nanocrystalline AZ91 Alloy: Preparation, Exceptional Thermal Stability and Enhanced Hardness

The Control of Nbb2 Particles in Al-Nbb2 Master Alloy and its Effect on Grain Refinement of Az91 Magnesium Alloy

Microstructure refinement and mechanical properties enhancement of Mg Al alloys via a novel of MgO nanoparticles modified graphene nanoplates refiner by in-situ synthesis

Achieving Significant Grain Refinement Efficiency in Mg-Al Alloys Via a GNP@MgO Composite Refiner

Nanomodification of aluminum alloys

The Growth Restriction Effect of Ticn Nanoparticles on Al-Zr Alloys: an Integrated Study by in Situ X-Radiography and Numerical Modeling

A Novel Method to Achieve Grain Refinement in Aluminum

AZ91 alloy nanocomposites reinforced with Mg-coated graphene: Phases distribution, interfacial microstructure, and property analysis

Effect of Adding AlN Ceramic Particles on the Micromorphology of the Mg 17 Al 12 Phase in Magnesium Alloys

The Effect of Al8Mn5 Intermetallic Particles on Grain Size of As-Cast Mg–Al–Zn AZ91D Alloy

Shear Enhanced Heterogeneous Nucleation in AZ91D Alloy

Effect of Al-Nb-Ti-B addition on microstructures, tensile mechanical and damping properties of AZ91 alloy

Enhanced grain refinement and mechanical properties of AZ91 alloy by a novel Al-5.1V-2.3B refiner containing VB 2 and VB particles

Al₂O₃ Nanoparticle Addition to Commercial Magnesium Alloys: Multiple Beneficial Effects

Controlled Preparation of a Novel GNP@MgO Particles and Its Refinement Mechanism in Mg-9Al Alloy