Abstract:Grain refinement is one of the most effective approaches to improving mechanical properties, reducing anisotropy and hot-cracking of additively manufactured alloys. Recent studies have shown that the extreme solidification conditions associated with additive manufacturing (AM), including large thermal gradient and high cooling rate, result in the difference in nucleation and grain growth mechanisms between AM and conventional casting. Thus, it is necessary to re-consider the grain refinement mechanisms, particularly the role of solute during AM. The present work investigates the grain refining efficiencies of different solute additives (Si, Cu and Ni) and their integration with nucleants (LaB6 nanoparticles) in additively manufactured pure Al. It was found that, despite the fast cooling during AM and nucleant inoculation, solute addition is essential for activating heterogeneous nucleation upon solidification to achieve high grain refining efficiency. However, the role of solute in grain refinement during AM cannot be readily interpreted by the classic grain growth restriction theory (Q value). This is attributed to the large thermal gradient in the melt pools during AM solidification, which significantly limits the development of constitutional supercooling. Alternatively, the role of solute can be better understood in terms of the lag in dendrite growth induced by solute rejection during solidification. This causes the difference between the actual dendrite growth and the theoretical pull rate, generating large thermal undercooling ahead of the solidification front to elicit heterogeneous nucleation. This work sheds new light on the factors affecting grain refinement under fast cooling.

REFINEMENT OF SOLIDIFICATION MICROSTRUCTURE BY MCAST PROCESS

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Optimization of Melt Treatment for Austenitic Steel Grain Refinement

Al-CeO2-Mg refiner on grain refinement, cast fluidity and mechanical properties of AZ91 alloy

Effect of ultrasonic melt processing and Al-Ti-B on the microstructural refinement of recycled Al alloys

Achieving refined microstructures and improved mechanical properties in a cup-shaped Mg-Gd-Y-Zr alloy casting by novel near-liquidus squeeze cast process

Assessment and Improvement of Melt Quality of Recycled Secondary A357 Alloy by Application of the High Shear Melt Conditioning (HSMC) Technology

Effect of Mg2sn Intermetallic on the Grain Refinement in As-Cast Am Series Alloy

Refinement of the Magnesium-Aluminium Alloy Microstructure with Zirconium

Reinforced cast metals: Part I Solidification microstructure

Clarifying the formation of equiaxed grains and microstructural refinement in the additive manufacturing of Ti-Cu

Demonstrating the roles of solute and nucleant in grain refinement of additively manufactured aluminium alloys

On the Sc induced solidification-heterogeneous microstructure in selective laser melted Al-5Mn alloys

An Efficient Analytical Model for Predicting the Microstructure Characteristic Parameters of the As-Cast and Solid-Solution Treated Mg-Gd-Y-Zr Cast Alloys

Correlation of Solidification Microstructure Refining Scale, Mg Composition and Heat Treatment Conditions with Mechanical Properties in Al-7Si-Mg Cast Aluminum Alloys

Grain refinement in semi-solid metal processing: current status and recent development

Numerical modeling and simulation of water cooling-controlled solidification for aluminum alloy investment casting

Effects of Al-Ti-C Refiner and Forming Processes on the Microstructure and Properties of Al-Zn-Mg-Cu Alloys

Solute trapping and non-equilibrium microstructure during rapid solidification of additive manufacturing

Effects of electromagnetic stirring and subsequent homogenization treatment on the microstructure and mechanical properties of Al70Zn10Mg10Cu5Si5 multi-component alloy

Effect of Scandium on Grain refinement mechanism and Mechanical Properties of Al-7Si-0.6Mg alloy at Different Cooling Rates