Abstract:The aim of this study was to investigate the low-temperature degradation (LTD) kinetics of tetragonal zirconia with 3 mol% yttria (3Y-TZP) dental ceramic using two degradation methods: hydrothermal degradation and immersed degradation. To study transformation kinetics, we prepared 3Y-TZP powders. We pressed these powders uniaxially into a stainless mold at 100 MPa. We then sintered the compacted bodies at intervals of 50 °C between 1300 °C and 1550 °C and immersed the specimens at various temperatures from 60 °C to 80 °C in 4% acetic acid or from 110 °C to 140 °C for the hydrothermal method. We used a scanning electron microscope (SEM) to confirm crystalline grain size and used X-ray diffraction to analyze the zirconia phase. As the sintering temperature increased, the calculated crystalline grain size also increased. We confirmed this change with the SEM image. The higher sintering temperatures were associated with more phase transformation. According to the Mehl-Avrami-Johnson equation, the activation energies achieved using the hydrothermal method were 101 kJ/mol, 95 kJ/mol, and 86 kJ/mol at sintering temperatures of 1450 °C, 1500 °C, and 1550 °C, respectively. In addition, the activation energies of the specimens immersed in 4% acetic acid were 60 kJ/mol, 55 kJ/mol, 48 kJ/mol, and 35 kJ/mol, with sintered temperatures of 1400 °C, 1450 °C, 1500 °C, and 1550 °C, respectively. The results showed that a lower sintering temperature would restrain the phase transformation of zirconia because of the smaller crystalline grain size. As a result, the rate of LTD decreased.

Apparent Activation Energy In Low Temperature Aging Of Y-Tzp Ceramics

[Study on Low Temperature Degradation of Dental Zirconia Ceramic].

Low Temperature Degradation Properties Comparison of Four Kinds of Y-TZP Ceramics

Modeling the aging kinetics of zirconia ceramics

Influence of Low Temperature Aging on the Flexural Strength of Y-TZP Ceramics

Microstructural dependence of aging induced phase transformation in Y2O3 partially stabilized ZrO2 polycrystals

Low Temperature Aging Effects of Y_2O_3 Stabilized Tetragonal Zirconia Polycrystals Ceramics in Acidic Environment

Effects of Low-Temperature Aging on Mechanical Properties of Two Kinds of Dental Zirconia Ceramics

Evaluation of Feasibility on Dental Zirconia-Accelerated Aging Test by Chemical Immersion Method

Effect of Al2O3 on Degradation of 3Y-TZP Ceramics at Low Temperature

Accelerated Aging in 3 mol%-Yttria-Stabilized Tetragonal Zirconia Ceramics Sintered in Reducing Conditions

High Temperature Mechanical Properties of Zirconia Metastable T '-Phase Degraded Yttria Stabilized Zirconia

Dielectric and energy storage properties of Ba0.85Ca0.15Zr0.1Ti0.9O3 ceramics with different aging temperature during the sol–gel process

Activation Energy for Conduction in Y2o3-Stabilized Zirconia

Comparison of the Low Temperature Degradation Properties of Two Y-TZP Ceramics for Dental Applications

Effect of Y2O3 Contents and Grain Sizes on the Mechanical Properties and Transformation of Zirconia Ceramics at Cryogenic Temperatures

Raman and X-ray photoelectron spectroscopic characterizations of thermal stability of 3 mol% yttria stabilized zirconia ceramics

Slow Crack Growth Behavior of 3Y-TZP in Cryogenic Environment Using Dynamic Fatigue and Indentation Technique

Degradation Analysis of YSZ Thermal Barrier Coatings

Porous Yttria-Stabilized Zirconia Ceramics with Ultra-Low Thermal Conductivity. Part Ii: Temperature Dependence of Thermophysical Properties

Effect of accelerated aging on dental zirconia-based materials