Abstract:Background: In previous work, we successfully prepared CuO/Al2O3 catalysts and evaluated their catalytic activity, kinetics and degradation mechanism for Fenton-like oxidation of p-nitrophenol (PNP) under microwave irradiation. However, we did not study the effect of important preparation parameters on the activities of catalysts. Objective: (1) The effect of preparation conditions: CuSO4 concentration of the impregnating solution, Al2O3 to CuSO4 solution ratio, type and concentration of precipitant and calcination temperature on the physico-chemical properties and catalytic activity were studied. (2) The catalytic performance of the Fenton-like oxidation reaction of PNP under microwave irradiation was evaluated and correlated with the characterization results. (3) The stability and catalytic mechanism of the catalysts were investigated. objective: (1) The effect of preparation conditions: CuSO4 concentration of impregnating solution, Al2O3 to CuSO4 solution ratio, type and concentration of precipitant and calcination temperature on the physico-chemical properties and catalytic activity were studied. (2) The catalytic performance of the Fenton-like oxidation reaction of PNP under microwave irradiation was evaluated and correlated with the characterization results.(3) The stability and catalytic mechanism of the catalysts were investigated. Methods: The CuO/Al2O3 catalyst was prepared by the impregnation deposition method. The 20 g pretreated Al2O3 particles were immersed in 0.6 mol/L Cu (NO3)2 solution and 0.4 mol/L NaOH solution for 24 h before and after. After cleaning and drying, the samples were calcined in an air muffle furnace for 4 h at a certain temperature to obtain CuO/Al2O3 catalyst. Then the catalyst was characterized and catalyzed. method: The CuO/Al2O3 catalyst was prepared by impregnation deposition method. The 20 g pretreated Al2O3 particles were immersed in 0.6 mol/L Cu (NO3)2 solution and 0.4 mol/L NaOH solution for 24 hours before and after. After cleaning and drying, the samples were calcined in an air muffle furnace for 4 hours at a certain temperature to obtain CuO/Al2O3 catalyst. Then the catalyst was characterized and catalyzed. Results: XRD, BET and FESEM results have demonstrated that the catalyst claimed at 300 and 350 ℃ showed a smaller size, a higher specific surface area and a better distribution of the CuO species than their counterparts prepared at higher calcination temperatures. The CuO/Al2O3 catalyst claimed at 300 and 350 ℃ also showed higher removal efficiencies for PNP than other catalysts prepared at higher calcination temperatures. result: XRD, BET and FESEM results have demonstrated that the catalyst claimed at 300 and 350 ℃ showed a smaller size, a higher specific surface area and a better distribution of the CuO species than their counterparts prepared at higher calcination temperatures. the CuO/Al2O3 catalyst claimed at 300 and 350 ℃ also showed higher removal efficiencies for PNP than other catalysts prepared at higher calcination temperatures. Conclusion: It was found that the catalysts prepared at 350 ℃ as calcination temperature showed higher surface area, smaller CuO particle size, and uniform CuO particle size distribution, and consequently showed better catalytic activities with better stability and reusability. Moreover, the XPS results of the catalysts showed a decrease in the Isat/Ip ratio after microwave enhanced Fenton-like reaction, confirming that CuO species has been reduced to Cu2O to some extent.

Preparation of Cu/ZnO/Al<sub>2</sub>O<sub>3</sub> catalyst under microwave irradiation for slurry methanol synthesis

Preparation of Cu/ZnO/Al 2 O 3 Catalyst under Microwave Irradiation for Slurry Methanol Synthesis

Influence of microwave irradiation on precursor microstructure and catalytic performance of Cu/ZnO/Al2O3 for slurry methanol synthesis

Enhancement of Stability and Activity of Cu/ZnO/Al2O3 Catalysts by Microwave Irradiation for Liquid Phase Methanol Synthesis

Effects of Cu/Zn on the structure and activity of CuO/ZnO/Al2O3 catalysts prepared under microwave irradiation in aging process

Influence Of Solvent Polarity On Microstructure Of Precursors And Cuo/Zno/Al2o3 Catalysts Aged Under Microwave Irradiation

Microstructure Characters of Cu/ZnO Catalyst Precipitated Inside Microchannel Reactor

Microwave-irradiation promoted Cu/ZnO/Al2O3 catalyst for hydrogen production from steam reforming of methanol

A Unique Microwave Effect on the Microstructural Modification of Cu/ZnO/Al2O3 Catalysts for Steam Reforming of Methanol.

Preparation of CuO/ZnO/Al2O3 Catalysts for Methanol Synthesis Using Parallel-Slurry-mixing Method

Surface Properties of CuO/ZnO/Al_2O_3 Catalyst for Methanol Synthesis in Slurry Reactor

Fine-tuning Pt Nanoparticle and Coordination for Enhanced Catalytic Efficiency in Microwave-Assisted Methylcyclohexane Dehydrogenation over Pt/Al2O3 Catalysts

Hydrogen Production via Methanol Steam Reforming over CuO/ZnO/Al2O3 Catalysts Prepared via Oxalate-Precursor Synthesis

Effect of Synthesis Conditions on the Catalytic Performances of CuO/Al2O3 in Microwave-enhanced Fenton-like System

Structure of Cucl/Sio2-Tio2 Catalyst and Its Catalytic Properties for Oxidative Carbonylation of Methanol

Influence of Cu/Zn atomic ratio on properties of CuO-ZnO/Al2O3 catalysts in methanol synthesis

Preparation and Photocatalytic Activity of Porous ZnO and Cr3+ Doped ZnO Microparticles

Influence of the Calcination on the Activity and Stability of the Cu/ZnO/Al2O3 Catalyst in Liquid Phase Methanol Synthesis

Cuo/Zno/Al2o3 Catalyst Prepared by Mechanical-Force-Driven Solid-State Ion Exchange and Its Excellent Catalytic Activity under Internal Cooling Condition

Preparation of Mo/CuZSM-5 Catalysts by Microwave Radiation and Its Catalytic Performance

Effective Cu/ZnO/Al2O3 Catalyst for Methanol Production: Synthesis, Activation, Catalytic Performance, and Regeneration