Abstract:A field-programmable gate array-based digital processor is proposed and demonstrated experimentally for a resonator fiber optic gyro (R-FOG) with a bipolar digital serrodyne phase modulation scheme, which we previously proposed especially for R-FOG signal processing and its noise reduction. The processor has multi functions. First, it suppresses both the fast- and slow-drift components in the difference between the laser frequency and the resonator's resonant frequency. The fast-drift with a small amplitude is compensated for by a proportional controller with an oversampling function to reduce the quantization error, while the slow-drift with a large amplitude is tracked using an up/down counter. Second, it automatically adjusts the amplitude of the waveform for bipolar digital serrodyne phase modulation for waves travelling both in the resonator clockwise and counterclockwise. Bipolar laser frequency alternation required to track the resonator's resonant frequency is ideally realized by adjusting the phase modulation amplitude. This automatic adjustment also realizes an additional function for reducing the gyro drift caused by backscattering in the fiber resonator, which was originally implemented in the shape of the waveform for bipolar digital serrodyne phase modulation. Third, the FPGA generates a gyro output with open-loop operation. The R-FOG performance is demonstrated to be improved by applying these three functions with the FPGA.

High-accuracy Signal Demodulation for Dithered Laser Gyros Based on FPGA

Research on Dynamic Performance Evaluation of Fiber Optic Gyroscope Based on Laser Doppler Measurement Technology

Design and Implementation of the Digital Detection Circuit for RFOG Based on a Single FPGA

FPGA-based Control Method for Rotor Vibration Signal's Full Cycle and Equal Phase Sampling

High-Performance Digital Signal Processor for Navigation Grade Resonant Fiber Optic Gyroscope

An Open-Loop RFOG Based on Harmonic Division Technique to Suppress LD's Intensity Modulation Noise

Reduction of High-Frequency Laser Noise in Resonant Fiber Optic Gyroscope with a Phase-Modulated Feedback Loop

All Digital Close-Loop Operation of Resonator Fiber Optic Gyro

Short Fiber Resonant Optic Gyroscope Using the High-Frequency Pound-Drever-Hall Technique.

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

CORDIC Algorithm Based Digital Detection Technique Applied in Resonator Fiber Optic Gyroscope

Digital Signal Processing for a Closed-Loop Resonant Fiber Optic Gyro

Digital Amplitude Demodulation for Micro Gyroscope with Levitated Rotor Based on DSP

Evaluation and Suppression of the Effect of Laser Frequency Noise on Resonant Fiber Optic Gyroscope

Signal processing improvement of passive resonant fiber optic gyroscope using a reciprocal modulation-demodulation technique

Resonant Fiber Optic Gyro Based on A Sinusoidal Wave Modulation and Square Wave Demodulation Technique

Design of the Digital in Signal Processing Platform of the Gyroscope Based on FPGA

Resonator Fiber Optic Gyro with Bipolar Digital Serrodyne Scheme Using a Field-Programmable Gate Array-Based Digital Processor

A High Data Rate Parallel Demodulator Suited to FPGA Implementation

A High Resolution Synchronous Demodulation Method Based on Gated Integrator for Precision Sensors

Design and Implementation of FPGA-based High-speed Phase Detector in Single-frequency Laser Interferometer