Abstract:The purposes of this paper are sixfold. First, any micromechanics model for predicting elastic property (stiffness) of a composite is applicable to a reasonable prediction of a composite strength, provided that the homogenized internal stresses in the matrix are converted into true values. The conversion for all of the stress components free of biaxially transverse loads is presented in the paper. Second, the predictability of 12 well-known micromechanics models for stiffness and strength of a unidirectional composite is assessed against the measured data of all of the nine unidirectional composites used in three world-wide failure exercises. An accuracy ranking is made accordingly. Third, it is demonstrated that the smallest fiber volume in a representative volume element for a finite element approach plays a more dominant role than other issues such as a random fiber array to achieve the highest simulation accuracy. This feature has been largely ignored in the current literature. Fourth, a consistency of a micromechanics model in calculating the internal stresses in the fiber and matrix of the composite is an issue that should be taken into account. Among the 12 models considered, only Bridging Model is consistent. A non-consistency implies that a full three-dimensional approach should be used to predict an effective property of the composite even though it is subjected to a uniaxial load. Fifth, an effective method to detect an interface debonding between the fiber and matrix subjected to an arbitrary load is presented in the paper. Only a transverse tensile strength of the composite, in addition to the original fiber and matrix properties, is needed. Whereas essentially any load can cause the interface to debond earlier before a composite failure, only a transverse tensile load carrying capacity of the composite is influenced significantly by the debonding. Specifically, an interface debonding has insignificant effect on a shear strength of the composite. Sixth, a fiber misalignment-induced kink band failure is analyzed by virtue of the original fiber and matrix properties, and a longitudinal compressive strength is predicted micromechanically.

THE PREDICTION OF AXIAL EQUIVALENT MODULUS FOR COMPOSITES REINFORCED BY STAGGERED ALIGNMENT DISCONTINUOUS FIBERS

Effect of fiber arrangement on mechanical properties of short fiber reinforced composites

A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

A nonlinear analytical model for tensile failure prediction of pseudo-ductile composite laminates

Thermal-Elastic Behaviors Of Staggered Composites

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

Non-orthogonal FE model with stress smoothing for progressive damage analysis of shear pre-deformed 3D angle-interlock woven composites under compression

Prediction of overall tension behavior of short fiber-reinforced composites

Prediction of Elastic Constants on 3D Four-Directional Braided Composites

Bimodulus constitutive relation and mesoscopic model of braided composites

On micromechanics approach to stiffness and strength of unidirectional composites

Prediction of Longitudinal Elastic Modulus of Unidirectional Short-Fiber-reinforced Composites

Theoretical analysis for the axial tensile response of the mesoscopic model for filament-wound composites

Analytical Prediction and Numerical Verification of Stress Concentration Profile Around an In-situ Tow Break in Resin-impregnated Filament-wound Composites

Damage analysis of shear pre-deformed 3D angle-interlock woven composites using experiment and non-orthogonal finite element model

Ultimate Strength Prediction of Two-Dimensional Tri-Axial Braided Composites Based on an Analytical Laminate Model

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure