Abstract:Abstract Investigations of the response of composites to time-dependent loadings are of considerable importance in structural analysis of many engineering fields, including aerospace, aeronautic, naval and automotive applications. Wave propagation in woven fabric composites poses major theoretical and experimental challenges. The mathematical modeling of dynamic stress concentrations in woven fabric composites is a fairly difficult task due to the great number of wave interactions between the fiber and the matrix. When composite structures composed of woven fabric preforms are loaded impulsively, stress waves propagate in different constituent phases at different speeds, which results in dynamic normal and shearing stresses at the interfacial bond region as well as at the yarn cross-over points. The concentration of these stresses may initiate unstable delamination and eventually failure of the laminated structure. This paper presents a theoretical study on the elastic wave propagation and local dynamic stress concentration in woven fabric composites. The analysis focuses on the unit cell of an orthogonal woven fabric composite, which is composed of two sets of mutually orthogonal yarns of either the same fiber (non-hybrid fabric) or different fibers (hybrid fabric) in a matrix material. Using the mosaic model for simplifying woven fabric composites and a shear lag approach to take into account the inter-yarn deformation, a one-dimensional analysis has been developed to predict the local elastodynamic and elastostatic behavior. The initial and boundary value problems are formulated and then solved using Laplace transforms. Closed form solutions of the dynamic displacements and stresses in each yarn, and the bond shearing stresses at the interfaces between adjacent yarns, are obtained in the time domain for in-plane, as well as out-of-plane impact loadings. When time tends to infinity, the dynamic solutions approach to their corresponding static solutions, which are also developed in this article. Solutions of certain special cases are identical to those reported in the literature. Lastly, the dynamic stresses and bond shearing stresses of plain weave composites subjected to step uniform impacts are presented and discussed as an example of the general analytical model.

Analytical Prediction and Numerical Verification of Stress Concentration Profile Around an In-situ Tow Break in Resin-impregnated Filament-wound Composites

Progressive failure analysis of 2D woven composites at the meso-micro scale

Micro Failure Analysis of Fiber Metal Laminates

Transient Elastic Wave Propagation and Local Dynamic Stress Concentration in Woven Fabric Composites

Computational modelling of postbuckling behavior of composite T-stiffened panels with different bonding methods

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Experimental and numerical simulation study on Near-edge/On-edge Low-Velocity impact and residual compressive strength of T300/69 laminates

Theoretical prediction for effective properties and progressive failure of textile composites: a generalized multi-scale approach

High-fidelity Simulations of Multiple Fracture Processes in a Laminated Composite in Tension

Numerical and Experimental Analysis of Delamination in the T-Stiffener Integrated Composite Structure

A Combined Experimental and Computational Analysis of Failure Mechanisms in Open-Hole Cross-ply Laminates under Flexural Loading

The over-notched flexure test method for determining the fracture toughness and bridging law of laminates

T-stress extraction in arbitrarily cracked orthotropic composites with the numerical manifold method and Stroh formalism

Experimental characterization of traction-separation laws for interlaminar fracture in geometrically-scaled composites using progressive digital image correlation and through-thickness deformation analysis

Unraveling Crack Stability and Strain Localization in Staggered Composites by Fracture Analysis on the Shear-Lag Model

Finite Element Analysis of Al-Carbon Fiber/Epoxy Composite Laminates

Theoretical analysis for the axial tensile response of the mesoscopic model for filament-wound composites

A Numerical Method for Simulating the Microscopic Damage Evolution in Composites under Uniaxial Transverse Tension

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Development of a Numerical Material Model for Axial Crushing Mechanical Characterization of Woven CFRP Composites

Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model