Abstract:Dual fluidized bed (DFB) reactor systems are widely used in gas–solid two-phase flow applications, whose gas–solid flow characteristics have a significant effect on the performance of many kinds of technologies. A numerical simulation model was established on the basis of a large-scale DFB reactor with a maximum height of 21.6 m, and numerical simulations focused on gas–solid flow characteristics were carried out. The effects of the superficial gas velocity of both beds and the static bed height and particle size on the distribution of the pressure and solid suspension density and the solid circulation rate were studied. The simulation results were in good agreement with the experimental data. With the strong support of the experimental data, the gas–solid flow characteristics of large-scale DFB reactors were innovatively evaluated in this numerical simulation study, which effectively makes up for the shortcomings of the current research. The results showed that the superficial gas velocity of both beds and the static bed height have different degrees of influence on the gas–solid flow characteristics. Specifically, for 282 μm particles, when the superficial gas velocity of both beds and the static bed height were 4.5 m/s, 2.5 m/s, and 0.65 m, respectively, under typical working conditions, the bottom pressure of the two furnaces was 3412.42 Pa and 2812.86 Pa, respectively, and the solid suspension density was 409.44 kg/m3 and 427.89 kg/m3, respectively. Based on the simulation results, the empirical formulas of the solid circulation rate were fitted according to different particle sizes. Under similar conditions, the solid circulation rates of particles with a particle size of 100 μm, 282 μm, 641 μm, and 1000 μm were 2.84–13.28, 0.73–4.91, 0.024–0.216, and 0.0026–0.0095 kg/(m2s), respectively. It can be found that the influence of the particle size on the solid circulation rate is the most significant among all parameters.

A Flow Model for Fluidized-Bed Reactor

Flow Distribution in a Novel Fixed Bed Bionic Reactor

Realization and Control of Multiple Temperature Zones in Liquid‐containing Gas–solid Fluidized Bed Reactor

Flow reactor models for fluid—fluid systems, based on the two-film theory

FLOW MODELING OF A FLUIDIZED BED REACTOR USING COMPUTATIONAL FLUID DYNAMICS

Pilot study on the method to ascertain parameters of fluidized bed reactor

A Two-Phase CFD Modeling Approach to Investigate the Flow Characteristics in Radial Flow Moving-Bed Reactors

Experimental Research on the Gas-Solid Flow Characteristics in Large-Scale Dual Fluidized Bed Reactor

CFD Simulations of Gas–liquid–solid Flow in Fluidized Bed Reactors — A Review

Flow Field Reconstruction in Novel Fluidized Bed by CFD Simulation

Optimum Design of Radial Flow Moving-Bed Reactors Based on a Mathematical Hydrodynamic Model

Modelling Ironmaking Blast Furnace: Solid Flow and Thermochemical Behaviours

Numerical Simulation of Hydrodynamic Behaviors of Internal Circulation Bio-Fluidized Bed Reactor

Flow mixing model of liquid phase in an internal airlift loop reactor

Modelling of Multiphase Flow in Ironmaking Blast Furnace

Model Study of Liquid Flow in the Blast Furnace Lower Zone.

Flow regimes in circulating fluidized beds

Modelling of Liquid Flow in the Blast Furnace. Application in A Comprehensive Blast Furnace Model

Dynamic Model Establishment and Analysis on Gas-solid Flow in CFB Whole Loop

Modeling of the gas-solid flow in a coal beneficiation fluidized bed

Numerical Simulation Study on the Gas–Solid Flow Characteristics of a Large-Scale Dual Fluidized Bed Reactor: Verification and Extension