Abstract:Abstract Elbow wear is a major threat to the multiphase pipeline transportation industry, which has a negative impact on the stable operation of the transportation system. In order to find the wear reduction methods of elbows in the fluidization pipeline transportation system for 2000-meter-deep coal resources, the swirler was installed upstream of the elbows, and wear simulations and tests of three kinds of elbows were carried out. The results showed that the maximum wear rate (MWR) of elbows increased and then decreased along the elbow angle. Due to the different directions of gravity, the heavy wear position (HWP) of the horizontal-vertical (H-V) elbow was in front of the vertical-horizontal (V-H) elbow. Because the downstream portion of the horizontal-horizontal (H-H) elbow was still a horizontal pipe, the HWP of the H-H elbow almost covered the whole elbow. The swirler placed upstream of the elbows could make the particles at the elbow move to the intrados of the elbows, resulting in less collision between the particles and the extrados of the elbows, thus reducing the wear of the elbows. The wear reduction effects of swirlers on three different elbows were favorably connected with the guide vane angle (GVA) and negatively correlated with the guide vane length (GVL), decreased first and then increased as the guide vane height (GVH) increased, and were little affected by the guide vane number (GVN) and the guide vane thickness (GVT). The mathematical models between the MWR of the elbows and guide vane parameters were established. By bench tests, the wear reduction effect of three kinds of elbows under the optimal guide vane parameters was 58.4%, 76.9%, and 78.6%, respectively. The errors between the bench test results and the simulation results were around 10%.

Research for the Wall Wear of Horizontal Pipeline in Swirling Flow Pneumatic Transport Based on the Computational Fluid Dynamics Simulation Analysis

Acoustic Analysis of Particle-Wall Interactions of Plug Flow in Vertical Pneumatic Conveying

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed

Experimental study of particle collision and rebound with moving walls

Numerical study of solid particle erosion on sidewall

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

Influence and optimization of swirler parameters on elbow wear of deep coal fluidization pipeline transportation system

Experimental and Numerical Studies on the Wall-Roughness Effect to Particle Dynamics in Various Gas-Particle Flows

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Research On The Motion Of Cylindrical Particles In The Pipe

CFD-DEM analysis of hydraulic conveying of non-spherical particles through a vertical-bend-horizontal pipeline

Analysis of Wall Sliding Characteristics about Abrasive Flow Carrier in Pipe

Three-dimensional numerical investigation of solid particle erosion in gate valves

Simulation of Abrasion Characteristics of Polar Ship Seawater Pipelines under the Coupling of Ice Particles and Vibration

Simulation of Sudden-Expansion and Swirling Gas-Particle Flows Using A Two-Fluid Particle-Wall Collision Model with Consideration of the Wall Roughness

A review of measurements and numerical studies for the effect of wall roughness on the gas-particle flow behavior

Research on Multiphase Flow and Nozzle Wear in a High-Pressure Abrasive Water Jet Cutting Head

Investigation on wear induced by solid-liquid two-phase flow in a centrifugal pump based on EDEM-Fluent coupling method

Investigation of the Influence of Flow Pattern On the Internal Corrosion in Horizontal-Vertical Downward Pipe with Oil-Water Flow

Experimental Studies of the Effect of Wall Roughness on Particle Behavior in Gas-Particle Flows