Abstract:Ideal cavities face a high risk of erosion in relation to pneumatic conveying. To reduce erosion, we introduce a height difference in the cavity, with the leading wall higher than the aft wall. To improve the cavity structure, the URANS (SST)-DPM method is adopted to study the effect of height difference h on gas flow, particle distribution, and particle erosion of a horizontal ideal cavity. The simulation procedure is validated by comparing the computational fluid dynamics results with experimental results. The results of the gas flow modeling show that the shear layer impinges on the aft wall when h is relatively small, and re-attaches on the downstream bottom wall as h increases. The re-attachment length is initially identical to the cavity width, then increases uniformly with h. Results of the particle distribution simulations indicate that for a Stokes number (St) of 0.12, the particles are evenly distributed in the cavity, and the distribution is independent of h; for St=1.2, dominated by the centrifugal force, the particles are mainly concentrated along the periphery of the main vortex when h is small. Owing to the variation of the main vortex, as h increases, more particles will fall down into the main vortex. For St=9.1, where gravity is dominant, the particles collide on the aft wall and rebound into the cavity through the main vortex when h is small. Otherwise, particles will move forward and only a few particles appear in the cavity. We explored the erosion distribution on the downstream bottom walls and extracted and analyzed the initial erosion positions. We also investigate the erosion on the aft walls, and the results indicate that lowering the aft wall even slightly will significantly reduce erosion.

A review of measurements and numerical studies for the effect of wall roughness on the gas-particle flow behavior

Experimental and Numerical Studies on the Wall-Roughness Effect to Particle Dynamics in Various Gas-Particle Flows

Experimental Studies of the Effect of Wall Roughness on Particle Behavior in Gas-Particle Flows

Effect of Base Roughness on Flow Behaviour and Size Segregation in Dry Granular Flows

Effects of Wall Roughness on Particle Dynamics in a Spatially Developing Turbulent Boundary Layer

Numerical study of the fine particle deposition behaviors on three-dimensional random rough walls

A review for measurements and simulations of swirling gas-particle flows

Effects of Solid Particles and Wall Roughness on Turbulent Boundary Layer in a Two-Phase Horizontal Channel Flow

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Measurements of Gas-Particle Two-Phase Flows over a Backward-Facing Step Using a PDPA

Numerical studies of gas-solid flow behaviors and wall wear in a swirling fluidized bed

Experimental studies on strongly swirling turbulent gas-particle flows using PDPA

Simulation of Sudden-Expansion and Swirling Gas-Particle Flows Using A Two-Fluid Particle-Wall Collision Model with Consideration of the Wall Roughness

A Second-Order Moment Particle–wall Collision Model Accounting for the Wall Roughness

Simulation of Mixing-Layer Gas-Particle Flows Using a Two-Fluid Particle-Wall Collision Model

Effects of Roughness on Fluid Flow Behavior in Ducts

Studies on Gas Turbulence and Particle Fluctuation in Dense Gas-Particle Flows

Experimental Investigation of the Effects of Particle Near-Wall Motions on Turbulence Statistics in Particle-Laden Flows

CFD–DEM Simulation of Pneumatic Conveying in a Horizontal Channel

Experimental and numerical investigation on the effect of surface roughness on the drag coefficient of a spherical particle

Numerical study of particle deposition in turbulent duct flow with a forward- or backward-facing step