Abstract:Advances in Structural Engineering, Ahead of Print. Concrete-filled steel tubular (CFST) columns have been widely used in multi-story and high-rise frame structures. During the service period, they may suffer vehicle impact due to traffic accidents or terrorist attacks. This paper numerically evaluates the performance of CFST columns under vehicle impact and investigates the effects of carbon FRP (CFRP) wrapping arrangements on performance improvement of the columns. Before that, a numerical model was developed to simulate the responses of CFST columns without and with FRP wrapping under vehicle impact and post-impact axial compression, and then calibrated by reported tests. Evaluation results show that the performance of CSFT columns under vehicle impact is divided into five levels, i.e., no repair required, rapid repair required, minor repair needed, major repair needed, and replacement needed. The performance level decreases with the increase in the vehicle weight or speed and increases with the increase in the column diameter or steel tube thickness. The column height has little effects on the performance level. A higher axial load ratio, e.g., 0.5, might reduce the performance level. Besides, a CFST column tends to fail in flexure mode when hit by F800 medium truck, while it may fail in flexure & shear mode when hit by C2500 pickup truck. Investigation results indicate that FRP wrapping with each layer orientation of 90° (i.e., in the longitudinal direction) and 0° (i.e., in the hoop direction) present the best performance improvement for a CFST column possibly undergoing flexure & shear and flexure failure, respectively. The increase of the number of FRP layers effectively improves the performance levels of CFST columns but the excessive demand may be not economical. It is not necessary to employ an FRP wrapping range of 100% for improving the vehicular impact performance level of a CFST column to the expected one.

Cyclic performance of fire-damaged concrete-filled steel tubular beam–columns repaired with CFRP wraps

Research on CFRP confined circular concrete-filled steel tubular columns subjected to cyclic lateral forces

Behaviour of Fire-Exposed Concrete-Filled Steel Tubular Beam Columns Repaired with Cfrp Wraps

Behaviour of fire-exposed CFST columns repaired with CFRP wraps

Compressive and flexural behaviour of CFRP-repaired concrete-filled steel tubes after exposure to fire

Experimental Study on Seismic Retrofit and Repair of Circular Reinforcement Concrete Short Columns by Fiber Reinforced Plastic

Axial Impact Behavior of Confined Concrete Filled Square Steel Tubes Using Fiber Reinforced Polymer

Cyclic Performance of Repaired Concrete-Filled Steel Tubular Columns after Exposure to Fire

Axial compressive behavior of pre-damaged concrete-filled square steel tube columns repaired with section circularization and CFRP composites

Fire Performance of Concrete-Filled Steel Tubular Columns Strengthened by Cfrp

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Behavior of CFRP retrofitted concrete filled steel tubular beams after exposure to fire

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Cracking Behavior of Cfrp Laminate-Strengthened Rc Beams with Premechanical and Postmechanical Environmental Damage

Performance evaluation and FRP strengthening of concrete-filled steel tubular columns subjected to vehicle impact

Residual Compressive Behaviour and CFRP Strengthening of SRCFST Columns after Combined Damage of Fire and Lateral Impact

Axial Loading Behavior of Cfrp Strengthened Concrete-Filled Steel Tubular Stub Columns

Tests on cyclic performance of FRP–concrete–steel double-skin tubular columns

Numerical Response of Concrete-Filled Steel Tubular (CFST) Columns Externally Strengthened with FRP Composites Subjected to Cyclic Loading

Experimental and numerical study on multi-impact performance of pre-damaged beams strengthened with CFRP

Comparative Study on the Behavior of Reinforced Concrete Beam Retrofitted with CFRP Strengthening Techniques