Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

Cryomodule design of ADS injectorⅡ

Cryomodule Control System of Injector Ⅱfor Accelerator Driven Sub-critical System

The Superconducting Magnet for ADS Injection-I

Development of AMS High Resolution Injector System

Physics design for the C-ADS main linac based on two different injector design schemes

Design Status of BCC Cryomodule for LCLS-II HE

Cryogenic Distribution System Design for Cryomodules and Cavities Test in HIAF Project

High Q and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Design of a 325MHz Beta=0.12 superconducting single spoke cavity for China-ADS

High and high gradient performance of the first medium-temperature baking 1.3 GHz cryomodule

Error analysis and lattice improvement for the C-ADS Injector- I

Design of new helium vessel and tuner for CEPC 650 MHz 2 cell cavity

Tuner control system of spoke012 SRF cavity for C-ADS injector I at IHEP

Design and Low-Power RF Test of a C-band Cryogenic RF Gun

ERROR ANALYSIS AND CORRECTION SCHEME IN C-ADS INJECTOR-I*

Investigation of a 1.6 K Space Cryocooler for Cooling the Superconducting Nanowire Single Photon Detectors

Physics Design of an Accelerator for an Accelerator-Driven Subcritical System

Design of a Cryogenic Amplifier with a Cascaded Network

A 1-2 K Cryogenic System with Light Weight, Long Life, Low Vibration, Low EMI and Flexible Cooling Capacity for the Superconducting Nanowire Single-Photon Detector

Development and tests of the 499.8 MHz srf cryomodules for HEPS