Abstract:This work improves metamaterial enhanced HgTe cQD photodetectors through new designs. The optimized designs boost the responsivity while simultaneously decreasing the noise spectral current density. This is achieved by enhancing the photogenerated charge carrier collection while reducing active material volume without compromising near unity absorption. Through this optimization a ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved at a wavelength of 2710 nm. Highly responsive, low noise, and inexpensive photodetectors that operate in the mid‐infrared (MIR) wavelength regime are in high demand for applications ranging from fundamental science to large scale industries. However, simultaneously achieving all this in one device architecture is very challenging. In this work, mercury telluride (HgTe) colloidal quantum dot (cQD) based photodetectors are systematically improved by the introduction of new metamaterial designs. The new designs are found by utilizing simulations. Thereby the structures are optimized to increase the responsivity and simultaneously decrease the noise spectral current density. This is achieved by focusing on improving the photogenerated charge carrier collection efficiency while reducing the active material volume without altering the near unity absorption. A standard metamaterial perfect absorber architecture based on disc resonators is used as a starting point for the optimization process. By optimizing the carrier extraction through contact engineering, resulting in a narrow slot metamaterial, an overall ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved. The final metamaterial design reaches a responsivity of 16.2 A W−1 and detectivity of 6×108 Jones at a wavelength of 2710 nm. The analysis therefore provides a route to improve the responsivity and noise characteristics of mid‐infrared photodetectors based on cost‐efficient colloidal quantum dots.

Photon Absorption Coefficient and the Franz-Keldysh Shift of Cutoff Wavelength for Mercury Cadmium Telluride Detectors

A Charge-Coupled Device-Based Laser Photofragment Fluorescence Spectrometer for Detection of Mercury Compounds

Ultraviolet Interferometric Spectroscopy for Real-Time Detection of Elemental Mercury

Two- and Three-Photon Absorption Induced Emission, Optical Limiting and Stabilization of CdTe/CdS/ZnS Quantum Tripods System

The ^{55}Fe X-ray Energy Response of Mercury Cadmium Telluride Near-Infrared Detector Arrays

Recent Progress in CdTe and CdZnTe Detectors

Metamaterial Engineering for Superior HgTe cQD Photodetector Performance

CdTe Based Energy Resolving, X-ray Photon Counting Detector Performance Assessment: The Effects of Charge Sharing Correction Algorithm Choice

Performance optimization of CZT thick films by CdTe buffer layers for solar-blind ultraviolet photoelectric detectors

Multi-Physics Field Based Simulation on the Response and Saturation Properties of Hg1-xCdxTe Based Photovoltaic Detectors With Composition Gradients

Characterisation of Redlen HF-CdZnTe at > 10 6 ph s -1 mm -2 using HEXITEC MHz

Characterization of the Uniformity of High-Flux CdZnTe Material

A Multi-Purpose Readout Electronics for CdTe and CZT Detectors for X-Ray Imaging Applications

Quantitative Analysis and Efficiency Study of PSD Methods for a LaBr3:Ce Detector

Reciprocity Failure in HgCdTe Detectors: Measurements and Mitigation

Role of selenium addition to CdZnTe matrix for room-temperature radiation detector applications

Study of Thick CZT Detectors for X-ray and Gamma-Ray Astronomy

High Sensitivity Hybrid PbS CQD-TMDC Photodetectors up to 2 $μ$m

Further evaluation of a THGEM UV-photon detector for RICH - comparison with MWPC

Terahertz photoconductivity of double acceptors in narrow gap HgCdTe epitaxial films grown by molecular beam epitaxy on GaAs(013) and Si(013) substrates

Study on the Mechanism of Using IR Illumination to Improve the Carrier Transport Performance of CdZnTe Detector