Abstract:This work improves metamaterial enhanced HgTe cQD photodetectors through new designs. The optimized designs boost the responsivity while simultaneously decreasing the noise spectral current density. This is achieved by enhancing the photogenerated charge carrier collection while reducing active material volume without compromising near unity absorption. Through this optimization a ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved at a wavelength of 2710 nm. Highly responsive, low noise, and inexpensive photodetectors that operate in the mid‐infrared (MIR) wavelength regime are in high demand for applications ranging from fundamental science to large scale industries. However, simultaneously achieving all this in one device architecture is very challenging. In this work, mercury telluride (HgTe) colloidal quantum dot (cQD) based photodetectors are systematically improved by the introduction of new metamaterial designs. The new designs are found by utilizing simulations. Thereby the structures are optimized to increase the responsivity and simultaneously decrease the noise spectral current density. This is achieved by focusing on improving the photogenerated charge carrier collection efficiency while reducing the active material volume without altering the near unity absorption. A standard metamaterial perfect absorber architecture based on disc resonators is used as a starting point for the optimization process. By optimizing the carrier extraction through contact engineering, resulting in a narrow slot metamaterial, an overall ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved. The final metamaterial design reaches a responsivity of 16.2 A W−1 and detectivity of 6×108 Jones at a wavelength of 2710 nm. The analysis therefore provides a route to improve the responsivity and noise characteristics of mid‐infrared photodetectors based on cost‐efficient colloidal quantum dots.

The ^{55}Fe X-ray Energy Response of Mercury Cadmium Telluride Near-Infrared Detector Arrays

Ultraviolet Interferometric Spectroscopy for Real-Time Detection of Elemental Mercury

A Charge-Coupled Device-Based Laser Photofragment Fluorescence Spectrometer for Detection of Mercury Compounds

Calibration of the Energy Response Matrix for X-ray Detector CCD236

Energy calibration of high-resolution X-Ray TES microcalorimeters with 3 eV optical photons

Photon Absorption Coefficient and the Franz-Keldysh Shift of Cutoff Wavelength for Mercury Cadmium Telluride Detectors

Characterization of the Mercury Pulsed Power X-Ray Source Spectrum Using Multichannel Density Aerogel Cherenkov Detectors

Calibration and Testing of Small High-Resolution Transition Edge Sensor Microcalorimeters with Optical Photons

Calibration of the instrumental response of Insight-HXMT/HE CsI detectors for gamma-ray monitoring

To Explore the More Realistic Energy Responses of the In-Depth Photon Counting Detectors

Calibration of HPGe Detector Efficiencies with Self-Absorption Correction of Gas Sphere Sources

A method for characterizing effective intensity of Franz-Keldysh effect in (HgCd)Te detectors

A Method of Measuring TES Complex ETF Response in Frequency-Domain Multiplexed Readout by Single Sideband Power Modulation

Performance of the HgCdTe Detector for MOSFIRE, an Imager and Multi-Object Spectrometer for Keck Observatory

A New Colorimetric and Ratiometric Chemodosimeter for Mercury (II) Based on Triphenylamine and Benzothiadiazolenovel

Experimental Determination of the Dependence Between Spectral Response and Current–Voltage Characteristics for MWIR HgCdTe Detectors

Feasible Energy Calibration for Multi-Threshold Photon-Counting Detectors Based on Reconstructed XRF Spectra

Metamaterial Engineering for Superior HgTe cQD Photodetector Performance

Multi-Physics Field Based Simulation on the Response and Saturation Properties of Hg1-xCdxTe Based Photovoltaic Detectors With Composition Gradients

Measurement of Reciprocity Failure in Near Infrared Detectors