EMI Filter Design and Mounting

Bai Tong-yun

DOI: https://doi.org/10.3969/j.issn.1003-0107.2006.03.023

2006-01-01

Abstract:The author of this essay explains the design and installation of electric filter.

What problem does this paper attempt to address?

Geometric approach to design a filter for superconducting energy storage system

Dehong Xu,Hao Ma

1999-01-01

Abstract:A geometric method to design a filter for superconducting energy storage system was presented. Effects of the filter on the fundamental power transferring both from the utility supply to the load and from the converter to the load were investigated. On this basis, a filter insuring the harmonic distortion of voltage on the load satisfying a given harmonics criteria and having the least effect on the fundamental frequency power transferring was designed.
3 Kw Completely-Integrated EMI Filter Based on Flexible Multi-layer Foil

陈谦,胡长生,邓成,温志伟,陈敏,林平,徐德鸿

DOI: https://doi.org/10.13234/j.issn.2095-2805.2012.2.76

2012-01-01

Abstract:EMI filter is an effective mean of interference suppression. The completely-integrated EMI filter has a distinct advantage in both performance and size. Based on the flexible multi-layer foil, a completely-integrated EMI filter which applied in 3kW occasion was designed. The integrated principle of the filter was introduced in detail. Then the design process and the computational methods of design parameters for the integrated structure were proposed. The experimental results show that the completely-integrated EMI filter has a better performance and smaller size compared to discrete filter in medium and high power occasions.
Design of EMI Filter for Suppressing High Frequency Electromagnetic Emissions

Zhang Yicheng,Su Dan,Zhu Xuejun,Yao Yongtao

DOI: https://doi.org/10.3969/j.issn.1007-869X.2007.09.009

2007-01-01

Abstract:This paper presents the basic structure,components and insertion loss of EMI filters,calculates the insertion losses under the standard condition or under the practical electromagnetic compatibility(EMC) test.After the verification through EMC test,this paper comes to the conclusion that the insertion loss of EMI filter under the 50/50Ω standard condition can serve as a good reference for suppressing high frequency electromagnetic emission.
Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

Xiaofeng Wu,Zhiwei Wen,Dehong Xu,Okuma, Y.

DOI: https://doi.org/10.1109/ipec.2010.5544556

2010-01-01

Abstract:A novel passive integration structure based on flexible multi-layer foils was proposed for EMI filter in switching-mode power supply. Common mode (CM) inductors and capacitors, differential mode (DM) inductors and capacitors were all integrated in a single unit. This passive integration applied flexible multi-layer foils (FML). Prototypes were implemented for an 1 kW switching power supply. The conductive EMI testing result was presented. The temperature rising and efficiency curves of the integrated EMI filter were also presented. In comparison with the discrete EMI filter, the prototype in this paper can reduce the volume by 32%.
Design of EMI Filters for Electric Ballast

Chen Cheng,Feng Zhuomin,Gao Mingzhi,Chen Min,Qian Zhaoming

DOI: https://doi.org/10.3969/j.issn.1004-440X.2008.02.017

2008-01-01

Abstract:A procedure for designing ac line EMI filters for HID ballast is presented.This procedure is based on the analysis of conducted EMI problems and the use of LISN.Design examples are given,and results are experimentally verified.
A simulation platform of Switched-mode Power Supplies for EMI filter design

Changbeng Zheng,Chen Chen,Henglin Chen

DOI: https://doi.org/10.1109/APEMC.2012.6237963

2012-01-01

Abstract:This paper presents a simulation platform of Switched-mode Power Supplies utilizing the characteristic of noise generation and coupling mechanism to predict the noise feature and design EMI filter in flyback converter. The paper also introduces the simulation algorithms which comprise noise source model, filter model, CM circuit model, DM circuit model and the method to obtain EMI spectrum. The bandwidth-effects-FFT computing method is used to analyze the spectrum of noise source, and the identified noise coupling paths are used to build up simulation circuit models. The simulation platform and the models are verified by experimental results. The simulation platform provides a simple and convenient way for EMI filter design of switched-mode power supplies within a certain frequency range.
Principles and design on integrated EMI filters

Zhiwei Wen,Xiaofeng Wu,Dehong Xu,Okuma Yasuhiro,Mino Kazuaki

2011-01-01

Abstract:This paper proposes an integrated structure for EMI filter based on the flexible multi-layer foil (FML foil). The DM windings are designed and all the passive components are integrated in one core. In this paper, the distributed circuit of the filter is given firstly, and then the integrated principle of DM & CM inductance is explained respectively, according to the DM & CM distributed current and equivalent magnetic circuits. The theoretic equations and the main design points are also given. The DM insert loss curves are compared under different DM inductance. The experiments show the proposed structure has smaller volume and better performance, compared with traditional EMI filters.
Integrated EMI filter design with flexible PCB structure

Xiaofeng Wu,Dehong Xu,Yan Zhang,Yi Chen,Yasuhiro Okuma,Kazuaki Mino

DOI: https://doi.org/10.1109/PESC.2008.4592171

2008-01-01

Abstract:A novel integrated EMI filter structure is proposed in this paper, based on the flexible PCB integrated L-C winding. By employing this integrated L-C structure, CM inductors, DM inductors and CM capacitors are integrated in a single unit. By compare with the planar PCB winding that used in previously proposed method for integrated EMI filters, we found that flexible PCB winding need less length, which means less loss and room. A prototype was built, and measurement result presented.
Design of High Frequency Fluorescent Lamp IC

Ai Junhua,Han Yan,Liu Jian

DOI: https://doi.org/10.3969/j.issn.1005-9490.2004.03.006

2007-01-01

Abstract:The design of a novel high frequency fluorescent lamp IC,on which low voltage control circuit and high voltage power device encapsulated in one chip,is introduced.And two of key circuits of class D DC-AC resonant converter are also presented.
Non-Ideal Electric Field Shielding With Grounding Resistor For Suppressing Emi Coupling In A Power Converter

Shize Ye,Xiaoyan Zheng,Zhichao Zheng,Ji Xiao,Henglin Chen

DOI: https://doi.org/10.1109/isemc.2018.8393955

2018-01-01

Abstract:Shielding techniques are widely applied in suppression of near electric field interference from power converters, so as to enhance their electromagnetic compatibility (EMC) performance. However, sometimes traditional shielding method cannot effectively suppress the electromagnetic interference (EMI) in the full frequency range. In order to make a power converter meet the limit requirement of EMC standard, this paper proposes an improved non-ideal electric field shielding method to balance the suppression effects of the low frequency and high frequency interference. A resistor with appropriate resistance is connected between the shielding layer and the reference ground so as to balance the suppression effect of the high frequency and the low frequency interference. The EMI measurement results show that the power converter with improved shielding method had good EMC performance.
A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Lei Wang,Hao Chen,Muhammad Saqib Ali,Guozhu Chen

DOI: https://doi.org/10.1109/peac.2018.8590615

2018-01-01

Abstract:In this paper, Electromagnetic interference (EMI) Common Mode (CM) noise is analyzed and method for noise suppression has been briefly investigated. An improved systematic design of EMI filter is proposed based on the insertion loss parameter, which take full account of the high-frequency (HF) characteristics. In order to improve the performance of EMI filter, resonance point cancellation is introduced to improve the HF characteristics of CM inductor which is an important portion of the EMI filter. In addition, suitable winding structure and high-performance magnetic materials is also helpful for the improvement of CM inductor. Then, the layout of the EMI capacitor based on the impedance mismatch principal and its parasitic inductance effects are also discussed. Ground leakage current, as a part of the CM noise, is also suppressed by correspond measure. As a proof-of-concept verification, the systematic design and optimization technique are validated by using a 2kW boost PFC prototype.
Study on the EMI filters to EFT/B tests in power converters

Limin Feng,Yeyuan Xie,Wei Chen,Zhaoming Qian

DOI: https://doi.org/10.1109/APEC.2006.1620755

2006-01-01

Abstract:As an EMI filter is often designed to attenuate the noise produced by power converters, it couldn't provide adequate insertion loss to suppress the noises under the EFT/B tests. In order to improve the high frequency performance of normal EMI filter to deal with the high frequency noises caused by EFT/B pulses, the structure should be modified. The modified filter structure is presented, and its effectiveness to improve EFT/B immunity of the converter is experimentally verified.
Reflection-type Low-pass EMI Filter Engineering Manufacture

白同云,刘亦农,倪建平,孟萃,辛理科

DOI: https://doi.org/10.3969/j.issn.1005-9776.2013.05.004

2013-01-01

Abstract:The technical composition and characteristics for reflection-type low-pass EMI filter with source impedance of various powers and various load impedances have been introduced. Then the engineering manufacturing requirements for components in common-mode and differential-mode filters have been raised respectively. Finally, some examples have been illustrated.
The Design of EMI Filter for Control Unit of DC/DC Converter Used in Fuel Cell Electric Vehicles

Su Dan,Zhu Xuejun,Zhang Yicheng,Yao Yongtao

DOI: https://doi.org/10.3969/j.issn.1000-3886.2007.06.025

2007-01-01

Abstract:The EMI filter is commonly used for the suppression of conducted interferance on power supply lines.This paper presents the basic structure and insertion loss of EMI filters.Then the method of calculation of insertion loss under the condition of EMI test is emphati- cally introduced.In consideration of the EMI standard of the conducted emission of vehicle devices,the needed insertion loss is cal- culated.Then components for the EMI filter are chosen and a prototype EMI filter is built,and the correctness of EMI filter design method is verified by the EMC test.
Automobile Electronic Systems Grounding Shielding and Filtering Designs

Bai Tong-yun

DOI: https://doi.org/10.3969/j.issn.1003-0107.2009.02.029

2009-01-01

Abstract:Now more and more high-tech electronic products are opened up and applied to automobile.It has become a very important research on how to resolve electromagnetic compatibility of automobile electronic systems and to improve reliability and security of automobile.With increasing of electronic equipments in bus , the electromagnetic interference becomes serious now。How to search the source of electromagnetic interference and grounding、shielding、filtering。This will be the main aim in the future1
Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

Cheng Deng,Dehong Xu,Pingping Chen,Changsheng Hu,Wenping Zhang,Zhiwei Wen,Xiaofeng Wu

DOI: https://doi.org/10.1109/tpel.2013.2295391

IF: 5.967

2014-01-01

IEEE Transactions on Power Electronics

Abstract:In order to increase the power density of the power factor correction converter, a novel integrated structure for both the electromagnetic interference (EMI) filter and the boost inductor is proposed with the flexible multilayer foil integration technique, which can reduce the volume of these passive components. Also, the performance of the proposed integrated structure is investigated based on the distributed electromagnetic component model. Furthermore, the design procedure for the integrated structure is detailed. Finally, a prototype of the integrated structure for both the EMI filter and the boost inductor has been built and the experiments demonstrate the validity of the integrated structure.
EMI Filter Design of SMPS Based on Integrated Choke

LIU Chun,ZHU Xue-jun,ZHANG Yi-cheng,YAO Yong-tao

DOI: https://doi.org/10.3969/j.issn.1001-2095.2008.01.007

2008-01-01

Abstract:In order to improve the performance of conventional EMI filter,the integrated choke was analyzed and adopted to replace the conventional choke.According to the principle of filter mismatched impedance,with impedance analysis of LISN and noise source,the equivalent circuits of common mode and differential mode were analyzed separately.Then an EMI filter design method of SMPS based on integrated choke was proposed.Experiment result proves that the method is effective,and it has been applied successfully in the control system of DC/DC converter for fuel cell electrical vehicle.
Design, Modeling, and Improvement of Integrated EMI Filter With Flexible Multilayer Foils

Xiaofeng Wu,Dehong Xu,Zhiwei Wen,Yasuhiro Okuma,Kazuaki Mino

DOI: https://doi.org/10.1109/TPEL.2010.2077655

2011-01-01

Abstract:Integrated electromagnetic interference (EMI) filter design method with flexible multilayer (FML) foils is presented. An analysis model for integrated EMI filter with FML foils, distributed electromagnetic component (DEMC) model, is proposed. The DEMC model is verified by the experiment. In addition, method to improve the high-frequency performance of integrated EMI filter is investigated. Prototype of integrated EMI filter with FML foils is made for 1 kW switching power supply. In comparison with the traditional discrete EMI filter, it can reduce total volume by 45%.
EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

Hao Chen,Yaowei Hu,Lei Wang,Zhuhaobo Zhang,Guozhu Chen

DOI: https://doi.org/10.1109/isie.2018.8433822

2018-01-01

Abstract:Aiming at the bad performance of EMI filter in the high frequency band, the non-ideal factors of common-mode chokes and the limitations of the existing high-frequency model are summarized. Considering the frequency characteristics of core material and the influence of parasitic capacitance, an improved cascaded Foster network model is established, and then the common-mode and differential-mode high-frequency equivalent circuits of EMI filter in 150kHz-30MHz are developed. Furthermore, an EMI filter design method based on the optimization of the impedance characteristics of common- mode chokes is proposed. An experiment is carried out to verify the method by an 1.25kW Boost PFC prototype. Results indicate that the device with the proposed EMI filter can pass the conducted EMI test successfully, and the design scheme can provide effective guidance for the remediation of conducted electromagnetic interference.
Electromagnetic Protection Optimization of the Intelligent Electronic Devices Based on the Passive EMI Filter Design

Guanchen Liu,Jintao Zhang,Jianping Yuan,Junjie Yang,Weizhong Gao,Qiang Yang

DOI: https://doi.org/10.1109/ei252483.2021.9713149

2021-01-01

Abstract:Passive EMI filter is an effective way to suppress high-frequency electromagnetic interference(EMI). This work takes the electronic current transformer acquisition card as the research prototype. In order to suppress the electrical fast transient/burst (EFT/B) applied at the signal input port of the acquisition card, this work proposed an optimal index to design a specific topology of the filter. Based on the high-frequency EFT/B, the optimal parameters of the EMI filter are calculated by applying nonlinear programming theory, and the designed EMI filter is verified through experiments.

EMI Filter Design and Mounting

Geometric approach to design a filter for superconducting energy storage system

3 Kw Completely-Integrated EMI Filter Based on Flexible Multi-layer Foil

Design of EMI Filter for Suppressing High Frequency Electromagnetic Emissions

Design and Experiment Research of Integrated EMI Filter Based on Flexible Multi-Layer Foils

Design of EMI Filters for Electric Ballast

A simulation platform of Switched-mode Power Supplies for EMI filter design

Principles and design on integrated EMI filters

Integrated EMI filter design with flexible PCB structure

Design of High Frequency Fluorescent Lamp IC

Non-Ideal Electric Field Shielding With Grounding Resistor For Suppressing Emi Coupling In A Power Converter

A Systematic Design and Optimization Technique for the Suppression of EMI Common Mode (CM) Noise

Study on the EMI filters to EFT/B tests in power converters

Reflection-type Low-pass EMI Filter Engineering Manufacture

The Design of EMI Filter for Control Unit of DC/DC Converter Used in Fuel Cell Electric Vehicles

Automobile Electronic Systems Grounding Shielding and Filtering Designs

Integration of Both EMI Filter and Boost Inductor for 1-Kw PFC Converter

EMI Filter Design of SMPS Based on Integrated Choke

Design, Modeling, and Improvement of Integrated EMI Filter With Flexible Multilayer Foils

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

Electromagnetic Protection Optimization of the Intelligent Electronic Devices Based on the Passive EMI Filter Design