Abstract:Abstract. With the accumulation of data about biogenic volatile organic compound (BVOC) emissions from plants based on branch-scale enclosure measurements worldwide, it is vital to assure that measurements are conducted using well-characterized dynamic chambers with good transfer efficiencies and less disturbance on natural growing microenvironments. In this study, a self-made cylindrical semi-open dynamic chamber with a Teflon-coated inner surface was characterized both in the lab with standard BVOC mixtures and in the field with typical broadleaf and coniferous trees. The lab simulation with a constant flow of standard mixtures and online monitoring of BVOCs by proton transfer reaction time-of-flight mass spectrometry (PTR-ToF-MS) revealed lower real-time mixing ratios and shorter equilibrium times than theoretically predicted due to wall loss in the chamber and that larger flow rates (shorter residence times) can reduce the adsorptive loss and improve the transfer efficiencies. However, even when flow rates were raised to secure residence times of less than 1 min, transfer efficiencies were still below 70 % for heavier BVOCs like α-pinene and β-caryophyllene. Relative humidity (RH) impacted the adsorptive loss of BVOCs less significantly when compared to flow rates, with compound-specific patterns related to the influence of RH on their adsorption behaviour. When the chamber was applied in the field to a branch of a Mangifera indica tree, the ambient–enclosure temperature differences decreased from 4.5±0.3 to 1.0±0.2 ∘C and the RH differences decreased from 9.8 ± 0.5 % to 1.2±0.1 % as flow rates increased from 3 L min−1 (residence time ∼4.5 min) to 15 L min−1 (residence time ∼0.9 min). At a medium flow rate of 9 L min−1 (residence time ∼1.5 min), field tests with the dynamic chamber for Mangifera indica and Pinus massoniana branches revealed enclosure temperature increase within +2 ∘C and CO2 depletion within −50 ppm when compared to their ambient counterparts. The results suggested that substantially higher air circulating rates would benefit by reducing equilibrium time, adsorptive loss, and the ambient–enclosure temperature and RH differences. However, even under higher air circulating rates and with inert Teflon-coated inner surfaces, the transfer efficiencies for monoterpene and sesquiterpene species are not so satisfactory, implying that emission factors for these species might be underestimated if they are obtained by dynamic chambers without certified transfer efficiencies and that further efforts are needed for field measurements to improve accuracies and narrow the uncertainties of the emission factors.

Development and performance evaluation of a novel environmental test chamber and emission simulation

Design of Temperature Testing System in Multi-Parameter Combined Environmental Test

A Cfd-Based Test Method For Control Of Indoor Environment In Air-Conditioned Rooms

Design and Evaluation of Full-scale Chamber for Determining Chemical Contaminant Emissions from Indoor Materials/Products

Characterization of a New Smog Chamber for Evaluating SAPRC Gas-Phase Chemical Mechanism

Design and Assessment of a Full-scale Indoor Environmental Cabin

A Framework and Experimental Study of an Improved VOC/formaldehyde Emission Reference for Environmental Chamber Tests

A new method of measuring VOC emission characteristics of dry building materials

Convenient, Rapid and Accurate Measurement of SVOC Emission Characteristics in Experimental Chambers

A reference method for measuring emissions of SVOCs in small chambers

A standard reference for chamber testing of material VOC emissions: Design principle and performance

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

Development of a Procedure for Estimating the Parameters of Mechanistic VOC Emission Source Models from Chamber Testing Data

Evaluation methods of measurement accuracy of VOC emissions from building materials and emission references

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

Predicting the emission characteristics of VOCs in a simulated vehicle cabin environment based on small-scale chamber tests: Parameter determination and validation

Measuring VOC Emission Characteristics of Building Materials in an Airtight Chamber

VOC emissions from a LIFE reference: Small chamber tests and factorial studies

Design and characterization of a semi-open dynamic chamber for measuring biogenic volatile organic compound (BVOC) emissions from plants

Measuring Whole-Body Volatile Organic Compound Emission by Humans: A Pilot Study Using an Air-Tight Environmental Chamber