Abstract:In order to evaluate the impacts of volatile organic compounds (VOCs) emissions from building materials on the indoor air quality beyond the standard chamber test conditions and test period, mechanistic emission source models have been developed in the past. However, very limited data are available for the required model parameters including the initial concentration ( C m0 ), in-material diffusion coefficient ( D m ), partition coefficient ( K ma ), and convective mass transfer coefficient ( k m ). In this study, a procedure was developed for estimating the model parameters by using VOC emission data from standard small chamber tests. In the procedure, initial values of the model parameters were refined by multivariate regression analysis of the measured emission data. To verify the procedure and estimate its uncertainty, simulated chamber test data were generated by adding 10% experimental uncertainties on the theoretical curve from the analytical solution to a mechanistic emission model. Then the procedure was applied to the generated data to estimate the model parameters. Results indicated that estimates converged to the original parameter values used for the data generation and the error of estimated parameters D m , C m0 and K ma were within ±10%, ±23%, and ±25% of the true values, respectively. The procedure was further demonstrated by applying it to estimate the model parameters from real chamber test data. Wide application of the procedure would result in a database of mechanistic source model parameters for assessing the impact of VOC emissions on indoor pollution load, which are essential input data for evaluating the effectiveness of various indoor air quality (IAQ) design and control strategies as well as the energy required for meeting given IAQ requirements.

Evaluation methods of measurement accuracy of VOC emissions from building materials and emission references

A new method of measuring VOC emission characteristics of dry building materials

Measuring VOC Emission Characteristics of Building Materials in an Airtight Chamber

Measurements and Calculations of Ventilation Rate for Naturally Ventilated Animal Buildings: A Review

A Framework and Experimental Study of an Improved VOC/formaldehyde Emission Reference for Environmental Chamber Tests

A Rapid and Accurate Method, Ventilated Chamber C-history Method, of Measuring the Emission Characteristic Parameters of Formaldehyde/vocs in Building Materials

Applying C-history method to measure the VOC emission parameters of building material and furniture: Tests and validation

A reference method for measuring emissions of SVOCs in small chambers

Comparative research between closed chamber C-history method and other methods for measuring characteristic parameters of building materials

Development and performance evaluation of a novel environmental test chamber and emission simulation

A standard reference for chamber testing of material VOC emissions: Design principle and performance

Convenient, Rapid and Accurate Measurement of SVOC Emission Characteristics in Experimental Chambers

Characterisation of VOC and Formaldehyde Emission from Building Materials in a Static Environmental Chamber: Model Development and Application

Analytical solution and dimensionless correlations for VOC emissions from dry building materials in static chamber

Temperature impact on the emissions from VOC and formaldehyde reference sources

New method for determining VOC emission parameters for dry building materials

Influence Of Precision Of Emission Characteristic Parameters On Model Prediction Error Of Vocs/Formaldehyde From Dry Building Material

PREDICTING THE EMISSION RATE OF VOLATILE AND SEMI-VOLATILE ORGANIC COMPOUNDS FROM BUILDING MATERIALS AND CONSUMER PRODUCTS - A REVIEW

Improved C-history Method for Rapidly and Accurately Measuring the Characteristic Parameters of Formaldehyde/vocs Emitted from Building Materials

Design and Evaluation of Full-scale Chamber for Determining Chemical Contaminant Emissions from Indoor Materials/Products

Development of a Procedure for Estimating the Parameters of Mechanistic VOC Emission Source Models from Chamber Testing Data