Abstract:In order to evaluate the impacts of volatile organic compounds (VOCs) emissions from building materials on the indoor air quality beyond the standard chamber test conditions and test period, mechanistic emission source models have been developed in the past. However, very limited data are available for the required model parameters including the initial concentration ( C m0 ), in-material diffusion coefficient ( D m ), partition coefficient ( K ma ), and convective mass transfer coefficient ( k m ). In this study, a procedure was developed for estimating the model parameters by using VOC emission data from standard small chamber tests. In the procedure, initial values of the model parameters were refined by multivariate regression analysis of the measured emission data. To verify the procedure and estimate its uncertainty, simulated chamber test data were generated by adding 10% experimental uncertainties on the theoretical curve from the analytical solution to a mechanistic emission model. Then the procedure was applied to the generated data to estimate the model parameters. Results indicated that estimates converged to the original parameter values used for the data generation and the error of estimated parameters D m , C m0 and K ma were within ±10%, ±23%, and ±25% of the true values, respectively. The procedure was further demonstrated by applying it to estimate the model parameters from real chamber test data. Wide application of the procedure would result in a database of mechanistic source model parameters for assessing the impact of VOC emissions on indoor pollution load, which are essential input data for evaluating the effectiveness of various indoor air quality (IAQ) design and control strategies as well as the energy required for meeting given IAQ requirements.

PREDICTING THE EMISSION RATE OF VOLATILE AND SEMI-VOLATILE ORGANIC COMPOUNDS FROM BUILDING MATERIALS AND CONSUMER PRODUCTS - A REVIEW

Early-Stage Emissions of Formaldehyde and Volatile Organic Compounds from Building Materials: Model Development, Evaluation, and Applications.

Predicting Emissions Of Svocs From Polymeric Materials And Their Interaction With Airborne Particles

A General Model For Analyzing Voc Emissions From Multi-Layer Dry Building Materials With Double Emission Surfaces

Predicting the emissions of VOCs/SVOCs in source and sink materials: Development of analytical model and determination of the key parameters

Review of volatile organic compounds emission models for indoor environment

A General Model for Analyzing Single Surface VOC Emission Characteristics from Building Materials and Its Application

Modeling Volatile Organic Compound (VOC) Concentrations Due to Material Emissions in a Real Residential Unit. Part I: Methodology and a Preliminary Case Study

An improved mass transfer based model for analyzing VOC emissions from building materials

General Analytical Mass Transfer Model for VOC Emissions from Multi-Layer Dry Building Materials with Internal Chemical Reactions

Numerical prediction model for long- and short-term concentration of indoor volatile organic compounds from building materials

The Multi-Layer Model For Voc Emissions From Dry Building Material With Double Emisssion Surfaces: Validation And Applications

A new mass transfer based model of VOC emissions from building materials

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

Sources of Volatile Organic Compounds and Emission Modeling in Real Buildings

An Analytical Mass Transfer Model for Predicting VOC Emissions from Multi-Layered Building Materials with Convective Surfaces on Both Sides

Review of Numerical Simulation Method and Software for Indoor Volatile Organic Compounds (VOCs)

A Time-Varying Model for Predicting Formaldehyde Emission Rates in Homes

Steady-state model for predicting size-resolved gas-particle partitioning of semi-volatile organic compounds (SVOCs) in indoor environments

Influence Of Precision Of Emission Characteristic Parameters On Model Prediction Error Of Vocs/Formaldehyde From Dry Building Material

Development of a Procedure for Estimating the Parameters of Mechanistic VOC Emission Source Models from Chamber Testing Data