Abstract:There are many mass-transfer models for predicting VOC emissions from building materials described in the literature. In these models, the volatile organic compound (VOC) emission rate and its concentration in a chamber or a room are usually obtained by analytical method or numerical method. Although these methods demonstrate some salient features, they also have some flaws, e.g., for analytical method the solutions of both room or chamber VOC concentration and building material VOC emission rate are constituted of the sum of an infinite series, in which additional computation for finding roots to a transcendental function is necessary, but sometimes quite complicated. Besides, when it is applied in complex cases such as multilayer emission with internal reaction, the solution is very difficult to get; for conventional numerical methods such as finite difference method, discrete treatment of both time and space may cause calculation errors. Considering that, the state-space method widely used in modern automation control field and the heat transfer field is applied to simulate VOC emissions from building materials. It assumes that a slab of building material is composed of a number of finite layers, in each of which the instantaneous VOC concentration is homogenous during the entire process of emission, while the time is kept continuous. Based on this assumption we can predict both the VOC emissions rate and the concentrations of VOCs in the air of a chamber or room. The method is generally applied to simulate VOC emissions from arbitrary layers of building materials, and the solution is explicit and simple. What's more, the method can be applied to the cases where a reaction producing/removing VOC in building materials exists. For some specific cases the method is validated using the experimental data and the analytical solutions in the literature. The method provides a simple but powerful tool for simulating VOC emissions from building materials, which is especially useful in developing indoor air quality (IAQ) simulation software.

Review of Numerical Simulation Method and Software for Indoor Volatile Organic Compounds (VOCs)

Modeling Volatile Organic Compound (VOC) Concentrations Due to Material Emissions in a Real Residential Unit. Part I: Methodology and a Preliminary Case Study

A Pre-Assessment and Pollution Prevention Tool for Indoor Volatile Organic Compound Simulations During the Interior Design Stage

Volatile Organic Compounds (Vocs) Concentration Simulation Of A Newly Decorated Residential Unit

Research progress of volatile organic compounds of indoor air

Dynamic Simulation Of Long-term Indoor VOC Concentrations In A Newly Renovated Residential Unit : A Pilot Study

Measurement Methods and Impact Factors for the Key Parameters of VOC/SVOC Emissions from Materials in Indoor and Vehicular Environments: A Review

Review of volatile organic compounds emission models for indoor environment

Indoor Pollutants Detection in Buildings Based on Numerical Simulation

Numerical prediction model for long- and short-term concentration of indoor volatile organic compounds from building materials

Simulated Study on Typical Sources of Volatile Organic Compounds (vocs) in Indoor Air

Simulation of Voc Emissions from Building Materials by Using the State-Space Method

Numerical Analysis of Source Emission and Sink Effect Characteristics for Indoor Air Pollution Caused by Building Material

Characteristics of Indoor Volatile Organic Compounds in Urban Residential Microenvironments in China

A review of indoor Gaseous organic compounds and human chemical Exposure: Insights from Real-time measurements

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

Simulation of Indoor Pollutant Distribution in Residential Buildings under Different Ventilation Modes

Indoor VOCs: Source characteristics and air cleaning

Field Measurement and Analysis of Vocs Concentrations in Changsha Residential Buildings

PREDICTING THE EMISSION RATE OF VOLATILE AND SEMI-VOLATILE ORGANIC COMPOUNDS FROM BUILDING MATERIALS AND CONSUMER PRODUCTS - A REVIEW

Sources of Volatile Organic Compounds and Emission Modeling in Real Buildings