Abstract:There are many mass-transfer models for predicting VOC emissions from building materials described in the literature. In these models, the volatile organic compound (VOC) emission rate and its concentration in a chamber or a room are usually obtained by analytical method or numerical method. Although these methods demonstrate some salient features, they also have some flaws, e.g., for analytical method the solutions of both room or chamber VOC concentration and building material VOC emission rate are constituted of the sum of an infinite series, in which additional computation for finding roots to a transcendental function is necessary, but sometimes quite complicated. Besides, when it is applied in complex cases such as multilayer emission with internal reaction, the solution is very difficult to get; for conventional numerical methods such as finite difference method, discrete treatment of both time and space may cause calculation errors. Considering that, the state-space method widely used in modern automation control field and the heat transfer field is applied to simulate VOC emissions from building materials. It assumes that a slab of building material is composed of a number of finite layers, in each of which the instantaneous VOC concentration is homogenous during the entire process of emission, while the time is kept continuous. Based on this assumption we can predict both the VOC emissions rate and the concentrations of VOCs in the air of a chamber or room. The method is generally applied to simulate VOC emissions from arbitrary layers of building materials, and the solution is explicit and simple. What's more, the method can be applied to the cases where a reaction producing/removing VOC in building materials exists. For some specific cases the method is validated using the experimental data and the analytical solutions in the literature. The method provides a simple but powerful tool for simulating VOC emissions from building materials, which is especially useful in developing indoor air quality (IAQ) simulation software.

Sources of Volatile Organic Compounds and Emission Modeling in Real Buildings

Modeling Volatile Organic Compound (VOC) Concentrations Due to Material Emissions in a Real Residential Unit. Part I: Methodology and a Preliminary Case Study

A Pre-Assessment and Pollution Prevention Tool for Indoor Volatile Organic Compound Simulations During the Interior Design Stage

Volatile Organic Compounds (Vocs) Concentration Simulation Of A Newly Decorated Residential Unit

Control of volatile organic compounds indoors—Development of an integrated mass-transfer-based model and its application

Simulation of Voc Emissions from Building Materials by Using the State-Space Method

Dynamic Simulation Of Long-term Indoor VOC Concentrations In A Newly Renovated Residential Unit : A Pilot Study

Simulated Study on Typical Sources of Volatile Organic Compounds (vocs) in Indoor Air

EFFECT OF VOC SORPTION ON INDOOR AIR QUALITY - A SIMULATION STUDY

Improving Material Selection for Residences Using Volatile Organic Compound Simulation at Design Stage: Field Verifications from a Unique Case Study

PREDICTING THE EMISSION RATE OF VOLATILE AND SEMI-VOLATILE ORGANIC COMPOUNDS FROM BUILDING MATERIALS AND CONSUMER PRODUCTS - A REVIEW

Review of Numerical Simulation Method and Software for Indoor Volatile Organic Compounds (VOCs)

Performance of three air distribution systems in VOC removal from an area source

Introduction on a Simulation Software Framework for Building Thermal Environment Integrated with Indoor Air Quality

Early-Stage Emissions of Formaldehyde and Volatile Organic Compounds from Building Materials: Model Development, Evaluation, and Applications.

Volatile Organic Compounds in Different Interior Construction Stages of an Apartment

The Role of Simulation in Preventing Indoor Air Pollution: a Foregone Conclusion?

Indoor VOCs: Source characteristics and air cleaning

Simulation of indoor volatile organic compounds (VOCs) concentrations under different air changes per hour (ACH)

Predicting the emissions of VOCs/SVOCs in source and sink materials: Development of analytical model and determination of the key parameters

Experimental assessment of modelling VOC emissions from particleboard into a ventilated chamber