Online vibration monitoring using laser vibrometer and acoustic emission techniques in robotic milling CFRP composites
Yajie Chen,Guanbo Wang,Mingbo Tan,Zilei Wen,Maojun Li
DOI: https://doi.org/10.1177/09544054241277585
2024-09-11
Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture
Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Carbon fiber reinforced polymer (CFRP) material has superior mechanical properties, often utilized in the aerospace industry. However, its prone to surface defects such as burrs and delamination under the influence of machining vibration, thereby compromising component quality. This study evaluated the relevant vibration signal features via signal processing methods, and investigated the effect of machining parameters on machining stability during robotic milling of CFRP composite. Specifically, the study assessed machining status by analyzing milling signals and compared surface quality between vibration and stable machining stages, the former corresponds to a larger Sa on the machined surface, with more pronounced profile fluctuations. Machining vibration manifests distinct characteristics in laser vibrometer signals, exhibiting in time-frequency plots with short-term signal enhancements at multiple frequencies. This phenomenon occurs more frequently during entry and exit stages. The results indicated that feed speed has a limited effect on milling stability within the selected parameter range, and severe machining vibration occurred at lower spindle speed (12,000 rpm) and higher milling depth (2 mm). Corresponding surface defects formation mechanisms were discussed, revealing that the formation of uncut burrs at the top was related to axial milling force, while interlayer debonding cracks stemmed from variations in fiber orientation between adjacent layers.
engineering, mechanical, manufacturing