Abstract:The integration of ultrasonic vibration into sheet forming process can significantly reduce the forming force and bring benefits including the enhancement of surface quality,the enhancement of formability and the reduction of spring-back.However,the influencing mechanisms of the high-frequency vibration on parts properties during the incremental sheet forming (ISF) process are not well known,preventing a more efficient forming system.This paper comprehensively investigates the effects of different process parameters (vibration amplitude,step-down size,rotation speed and forming angle) on the micro-hardness,minimum thickness,forming limit and residual stress of the formed parts.First,a series of truncated pyramids were formed with an experimental platform designed for the ultrasonic-assisted incremental sheet forming.Then,micro-hardness tests,minimum thickness measurements and residual stress tests were performed for the formed parts.The results showed that the surface micro-hardness of the formed part was reduced since the vibration stress induced by the ultrasonic vibration within the material which eliminated the original internal stress.The superimposed ultrasonic vibration can effectively uniform the residual stress and thickness distribution,and improve the forming limit in the case of the small deformation rate.In addition,through the tensile fracture analysis of the formed part,it is shown that the elongation of material is improved and the elastic modulus and hardening index are decreased.The findings of the present work lay the foundation for a better integration of the ultrasonic vibration system into the incremental sheet forming process.

Design of an ultrasonic-assisted micro extrusion forming system

Study on Metal Forming Patterns of the Ultrasonic Vibration Assisted Upset-extruding Process

Micro Pin Extrusion of Metallic Materials Assisted by Ultrasonic Vibration

Design and Development of Ultrasonic Assisted Micro Forming System

Experimental Study of High-Frequency Vibration Assisted Micro/Mesoscale Forming of Metallic Materials

Experimental Investigation into Effects of Different Ultrasonic Vibration Modes in Micro-Extrusion Process

Design of Ultrasonic Machining Device for Thin-Wall Cylinder of Air Compressor

Design and Implementation of the Micro-Extrusion Forming System

Research on the Micro-Extrusion Process of Copper T2 with Different Ultrasonic Vibration Modes

A New Porous Block Sonotrode for Ultrasonic Assisted Micro Plastic Forming

Surface and volume effects in multimodal ultrasonic vibration assisted micro-extrusion forming: Experiments and modelling

Research Progress and Outlook of High-frequency/ultrasonic Vibration Assisted Microforming

Investigation on friction characteristics of micro double cup extrusion assisted by different ultrasonic vibration modes

A Review on Ultrasonic-Assisted Forming: Mechanism, Model, and Process

Design and Experiment Study of Micro-extrusion Forming System Based on Piezoelectric Actuator

Experimental and Numerical Study of Forming Limit in 1060 Aluminum Ultrasonic Vibration Single Point Incremental Forming

Design and analysis of ultrasonic horn for polymer sheet forming

Design of ultrasonic elliptical vibration cutting system for tungsten heavy alloy

Influence of ultrasonic vibration on forming force of 1060 aluminum sheet single point incremental forming

The Influence of Ultrasonic Vibration on Parts Properties During Incremental Sheet Forming

Improving the surface quality of material extrusion additive manufacturing parts by using ultrasonic‐vibration machining