Abstract:A procedure of fabricating ring ultramicroelectrodes (UMEs) is presented that employs radio frequency (RF) magnetron sputtering and low temperature plasma enhanced chemical vapor deposition (PECVD) technique. Specially, the fabrication of Au ring UMEs is described. The 125μm diameter optical fibers are concentrically coated by RF magnetron sputtering with Au films of 300nm thickness and then insulated by low temperature PECVD with silicon nitride films of 0.7μm thickness. The silicon nitride films are found to be free of microcracks and characterized with excellent adhesion at the interfaces of Au films/silicon nitride films and silicon nitride films/optical fibers by scanning electron microscopy (SEM). In the electrochemical experiments the optical fiber scribe is used to produce tip surface. The electrochemical responses are sigmoidal in shape at different scan rates and indicate that the fabricated Au ring electrodes exhibit electrochemical response of UMEs. The diffusion-limited steady-state currents show that microgaps or microcracks of silicon nitride thin film at the electrode tip may be developed or that the quality of adhesion at the interfaces of silicon nitride thin film/Au thin film and Au thin film/optical fiber may be destroyed in the process of producing the electrode tip surfaces with the carbide fiber scribe, so a polishing fixture should be specifically developed to produce the electrode active surface for the quantitative analyses of ring UMEs with small overall size base on the RF magnetron sputtering and PECVD techniques.

Application Of Micro/Nanofabrication Technologies In The Ultramicroelectrode Fabrication

Fabrication of Ultramicroelectrodes Based on PECVD

Fabrication of Disk Ultramicroelectrode Using Nanoskiving Method.

Applications of Micro/nanofabrication on Micro/nano Electrical Devices

Fabrication and Electrochemical Characterizations of Strip Ultramicroelectrode Array Prepared by Nanoskiving

Radio Frequency Magnetron Sputtering of Au and Low Temperature Plasma Enhanced Chemical Vapor Deposition of Silicon Nitride for Ring Ultramicroelectrodes Fabrication

Application of Micro/Nanofabrication Techniques to On‐Chip Molecular Electronics

Micorfabrication of Miniature Electrode Array along Micro Channels

Fabricating Technologies of Nanofluidic Chips and Their Applications

A novel MEMS compatible lab-on-a-tube technology.

Direct And All-Dry Microfabrication Of Ultramicroelectrode Based On Cold Atmospheric Microplasma Jet

Novel Nanotextured Microelectrodes: Electrodeposition-based Fabrication and Their Application to Ultrasensitive Nucleic Acid Detection

The Fabrication Technology of Electrochemical Micromachining

Research On Micro Electrode Fabrication Based On Ecm

Fabrication of a Novel Liquid Metal Microelectrode in Microfluidic Chip

Microelectrode fabrication by electrochemical turning

Development of Disk Ultramicroelectrodes Based on Low Melting or Softening Point Metal Fibers by Low Temperature Plasma Enhanced Chemical Vapor Deposition

Fabrication of Microelectrode Arrays Using Microcontact Printing

Microelectrode Array Fabrication by Micro-Wedm

Electrodeposition-Based Controllabe Fabrication of Novel Pd Nanotextured Microelectrodes

Fabrication and Application of Nanometer-sized Metal Electrodes in Electroanalytical Measurements