Abstract:Electrode fabrication in microfluidic devices is often avoided due to the smaller footprint of the platform, associated complexity in the process, and absence of a well-established method. In this article a glass microchip with chemically modified and vapor deposited gold internal electrode was fabricated and used for biomolecule immobilization and electrochemical applications. The silanol (-OH) on glass surface of the microdevice was modified with (3-mercaptopropyl)trimethoxysilane prior to gold deposition to achieve a strong attachment of the metal film using the gold-thiol binding. The practical utility of the microdevice with gold surface was demonstrated by performing quantitative enzyme linked immunosorbent assay (ELISA) of human interferon gamma (IFN-γ) antigen, yielding a limit of detection (LOD) of 0.15 pg/mL compared to 4 pg/mL in the microplate assay. Additionally, the functionality of the internal electrode was established by performing cyclic voltammetry (CV) and linear sweep voltammetry (LSV) of potassium ferricyanide (III) in potassium chloride (KCl) solution using the proposed gold patterned electrode in the microchip, offering limits of detection of 0.14 and 0.11 mM for CV and LSV respectively. Both the ELISA and electrochemical assays were validated by generating calibration curves and using a control sample for the electroanalytical sensing applications. The measurements yielded experimental results that agreed with control concentration with 7% relative standard deviation (RSD). The promising reproducibility of the electrode in fabrication with no/minimum failure rate and its outstanding performance in immunosensor applications as well as an electron exchange surface makes our technique of gold electrode fabrication in microchips a state of the art.

Fabrication of a Novel Liquid Metal Microelectrode in Microfluidic Chip

Capillary-Based Microfluidic Fabrication of Liquid Metal Microspheres Toward Functional Microelectrodes and Photothermal Medium.

A Novel Method to Construct 3D Electrodes at the Sidewall of Microfluidic Channel

Development of Three-Dimension Microelectrode Array for Bioelectric Measurement Using the Liquidmetal-Micromolding Technique

Simple and Low Cost Integration of Highly Conductive Three-Dimensional Electrodes in Microfluidic Devices

Fabrication of Micro/Nanofluidic Chip on Glass Substrate and Its Application for Electrokinetic Concentration of Proteins

Meniscus-confined Electrodeposition of Metallic Microstructures with In-Process Monitoring of Surface Qualities

Fabrication Of Microfluidic Chip And Its Application

A Study of Dielectrophoresis-Based Liquid Metal Droplet Control Microfluidic Device

Self-supporting 3D Printed Flexible Liquid Metal Electrodes for Electrostatically Microfluidic Valves

Study on Processing Technique of 3-D PDMS-Ag Composite Microelectrodes Integrated in Microfluidic Systems

Local nano-electrode fabrication utilizing nanofluidic and nano-electrochemical control

Fabrication and Characterization of an Innovative Integrated Solid-State Microelectrode

Robust Gold Electrode Fabrication in a Microfluidic System

Capillarity Enabled Large‐Array Liquid Metal Electrodes for Compact and High‐Throughput Dielectrophoretic Microfluidics (Adv. Mater. 21/2024)

Electrokinetically induced concentration of diluted sample by liquid metal embedded microfluidic chip

Low Cost Fabrication of Microelectrodes on Plastic Substrate

10.1063/5.0083713.1

Fabrication of Electrochemical Microfluidic Chip Integrated Pt Micro Electrode

Fabrication of a Metal Micro Mold by Using Pulse Micro Electroforming

Fabrication of a Microfluidic Ag/AgCl Reference Electrode and Its Application for Portable and Disposable Electrochemical Microchips