Abstract:Polydimethylsiloxane (PDMS) has been widely used in chip fabrication. However, PDMS itself is a non-conducting polymer, and the adhesion between metal and PDMS is also really weak. Hence, integrating microelectrodes on PDMS microchips has become a technical bottleneck in many applications such as miniaturized electrochemical (EC) sensing systems. A new method was presented to integrate Ag/AgCl electrode on microfluidic chips by using a new conductive composite. It was made of the mixture of PDMS and silver powders, so good electrical conductivity was achieved. Two chloridizing methods were selected to fabricate Ag/AgCl reference electrode. In the electrolysis method, Ag-PDMS composite electrode (as anode) was electrolyzed for 24 hours in saturated KCl solution. In the second one, silver chloride powder was uniformly mixed with silver powders and PDMS pre-polymer, and then cured 1 hour at 90 oC. These composite materials could be efficiently shaped as different electrode structures. Its potential response was measured in different chloride solutions, and its stability was also measured in water (10 days) and 3 mol/L KCl solution (14 days), respectively. Electrochemical characteristics of the electrode were also analyzed in potentiometric and amperometric measurements. SEM pictures showed that the surface of the electrode was fluffy and of rough morphology, which might increase its contacting area with solution, so as to improve the measuring adequacy and accuracy. The electrodes had a fast and stable potential response toward Cl− concentration change.The much tiny potential fluctuation indicated that the composite electrode was stable, which could be served as a good reference for EC measurements. Its CV curves showed its performance was almost as good as a standard reference electrode. Based on its excellent properties, the composite material can be widely applied in microfluidic field. The new method has many advantages such as simple operation, low cost and no special environmental requirements.

Fabrication and Characterization of an Innovative Integrated Solid-State Microelectrode

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Fabrication of a Microfluidic Ag/AgCl Reference Electrode and Its Application for Portable and Disposable Electrochemical Microchips

Batch Microfabrication and Testing of a Novel Silicon-Base Miniaturized Reference Electrode with an Ion-Exchanging Nanochannel Array for Nitrite Determination.

Design and Fabrication of Ag / AgCl Composite Reference Electrode Based on Microfluidic Chip

Batch Fabrication of Miniaturized Ag/AgCl Reference Electrode with Ion Exchanging Micro-Nano-Pores by Silicon-Base Double-Side Anisotropic Etching Process

Fabrication of a Novel Liquid Metal Microelectrode in Microfluidic Chip

An Integrated Solid-State pH Microelectrode Prepared Using Microfabrication

Fabrication of the Integrated Gold Film Multi-electrode Array

Fabrication of Single-Particle Microelectrodes and Their Electrochemical Properties.

Development and Characterisation of Electroplating Silver/silver Chloride Modified Microelectrode Arrays

A Novel Flexible Ag/AgCl Quasi-Reference Electrode Based on Silver Nanowires Toward Ultracomfortable Electrophysiology and Sensitive Electrochemical Glucose Detection

Design and Fabrication of Ag / AgCl Reference Electrode Based on PDMS Conductive Composite Material

Fabrication And Characterization Of Micro-Nano Electrodes For Implantable Bci

Fabrication of Metal Nanoelectrodes by Interfacial Reactions

Microfluidic Amperometric Detection Sensor with Integrated Ag/AgCl Reference Electrode

Robust Gold Electrode Fabrication in a Microfluidic System

Fabrication and Impedance Measurement of Novel Metal Dry Bioelectrode

Innovative solid-state microelectrode for nitrite determination in a nitrifying granule.

Study of a novel fabrication method of 3D Ag-based nanoporous structures for electrochemical detection

Highly Stable Fibrous Solid-State Ag/AgCl Reference Electrode