Abstract:Fast charging is critical for the efficient storage of energy in devices like electric vehicles and portable electronics. The rate performance of electrodes is limited by the electron transfer rate, the ohmic resistance of the electrode, the size and shape of the primary electrode particles, and the charge carrier diffusion process within the electrodes. However, separating the intrinsic contributions of mass transport and charge transfer from non-equilibrium data obtained under large interfacial polarization is very complex, which limits our understanding of high rate electrodes during charging and discharging. While it is possible to extract the diffusive and capacitive components of an electrode’s capacity from cyclic voltammetry (CV) data using the Dunn method, the Dunn model assumes a constant diffusional overpotential. In reality the ohmic resistance scales with the current, so that the ohmic potential drop across the electrode cannot be neglected a priori for fast charging electrodes in which high current densities are a requirement. We recently developed a new model based on the Butler-Volmer equation for the kinetics of the electron exchange process, and incorporated the charge carrier diffusion process and the internal ohmic losses, as well as the effect of the shape and dimensions of the primary electrode particles on the effective diffusion rate [1]. The model can provide the relation between current peak voltages and peak currents from a series of sweep rate CV measurements. The ohmic resistance, equilibrium voltage, exchange current (related to the electrochemical reaction rate) and limiting current (related to the charge carrier diffusion coefficient and Nernst diffusion layer thickness) can be extracted as independent variables from the fitted experimental data. By simulating a range of different high rate Li electrode materials (both cathodes and anodes), we identified influence of the reaction rate on the overpotential as a common significant factor, which explains the nonlinear relation between the potential and the current at peak position in different CV measurements. Our analysis suggests that a higher electrochemical reaction rate seems to be more important for the realization of faster charging batteries than a larger carrier diffusion coefficient. Finally, our extended model also enables us to predict the overpotential at any applied potential, which is not possible with other current models known till date. This insight helps us to gain more detailed understanding of the relationship between the intrinsic properties of the electrode materials and their rate performance in different reaction stages. This may facilitate further modification of electrode material towards enhanced high rate performance in next-generation batteries. [1] R. Xia et al., Energy Storage Mater. 53 (2022) 381-390.

Modeling Charging Current Dynamics at Microelectrodes and their Interfaces with Electrolyte and Insulators with a Focus on Microfabricated Gold Microband Electrodes on an SU-8 Substrate

Kinetics of Charge-Transfer Reactions at Nanoscopic Electrochemical Interfaces

Self-gating in semiconductor electrocatalysis

Decoupling Reaction, Diffusion and Ohmic Processes in Fast-Charging Electrodes: A New Model for CV Data Analysis

Electrochemical-Mechanical Coupling Experiments on Solid-State Battery Materials and Interfaces

Measurement of Electric Double Layer Charging Dynamics on Platinum Electrodes in Aqueous Solutions of Alkali Sulfates and Nitrates

Study and modeling of the Solid Electrolyte Interphase behavior on nano-silicon anodes by Electrochemical Impedance Spectroscopy

Kinetic and geometric considerations in modeling screen-printed electrode-based sensors

Modelling electrified microporous carbon/electrolyte electrochemical interface and unraveling charge storage mechanism by machine learning accelerated molecular dynamics

Marcus-Hush-Chidsey Kinetics at Electrode-Electrolyte Interfaces

Robust Gold Electrode Fabrication in a Microfluidic System

Studies of Charge Transfer Processes at the Liquid/Liquid Interfaces by Scanning Electrochemical Microscopy and Nanoelectrodes

Impact of charging in constant potential electrochemistry modeling

Modeling Non-Equilibrium Ion-Transport in Ion-Selective-Membrane/Electrolyte Interfaces for Electrochemical Potentiometric Sensors

Microporous Substrate Effect on SECM Steady State Current- A 3D Modeling Study Critical to Battery Electrode Performance

An on-chip electrical transport spectroscopy approach for in situ monitoring electrochemical interfaces

Fabrication and Characterization of an Innovative Integrated Solid-State Microelectrode

A comparative study on fabrication techniques for on-chip microelectrodes

Influence of Finite Diffusion on Cation Insertion-Coupled Electron Transfer Kinetics in Thin Film Electrodes

Electrode microstructure design based on a CA-FD hybrid computation framework to alleviate the concentration polarization