Abstract:The fabrication of self-shunted SNS (superconductor/normalconductor/superconductor) Josephson junctions for rapid single flux quantum (RSFQ) logic could potentially facilitate increased circuit density, as well as reduced parasitic capacitance and inductance over the currently used externally shunted SIS (superconductor/insulator/superconductor) trilayer junction process. We report the deposition, fabrication, and device characterization of Josephson junctions prepared with Nb1-yTiyN electrodes and TaxN barriers tuned near the metal - insulator transition, deposited on practical large-area oxide-buffered silicon wafers. When scaled to practical device dimensions, this type of junction is found to have an IcRn product of over 0.5 mV and a critical current (I-c) and normal resistance (R-n) of magnitudes suitable for single flux quantum digital circuits. A longer than expected normal-metal coherence length (xi(n)) of 5.8 nm is inferred from the thickness dependence of J(c) at 4.2 K for junctions fabricated using a barrier resistivity of 13 m Omega cm. Although not well understood and not quantitatively predicted by conventional theories, this results in a sufficiently high I-c and IcRn to make the junctions suitable for practical applications. Similar observations of unexpectedly large Josephson coupling currents in SNS junctions have been documented in other systems, particularly in cases when the barrier is near the M - I transition, and have become known as the giant proximity effect. The temperature dependence of xi(n), I-c R-n, and J(c) are also reported. For this technology to be used in practical applications, significant improvements in our fabrication process are needed as we observe large variations in I-c and R-n values across a 100 mm wafer, presumably as a result of variations in the Ta: N stoichiometry and the resulting changes in the TaxN barrier resistivity.

Implementation and low speed test of ultra-fast interface circuits for Josephson-CMOS hybrid memories

Josephson-CMOS Hybrid Memory with Ultra-High-speed Interface Circuit

Hybrid Josephson-CMOS memory: a solution for the Josephson memory problem

Multiplexed quantum transport using commercial off-the-shelf CMOS at sub-kelvin temperatures

Design and testing of high-speed interconnects for Superconducting multi-chip modules

CMOS-to-SFQ Interface Circuits for RZ and NRZ Coded Signals Transformation

Characterization of high-speed writing and reading operations of the superconducting memory cell

Low-Latency Adiabatic Quantum-Flux-Parametron Circuit Integrated With a Hybrid Serializer/Deserializer

Ferromagnetic Josephson switching device with high characteristic voltage

High Speed, Low Resource and Non-volatile MTJ-CMOS Hybrid Logical Circuits

Superconducting Pulse Conserving Logic and Josephson-SRAM

Advanced FLUXONICS Process CJ2 Based on Sub-μm-Sized Cross-Type Nb/AlO x /Nb Josephson Junctions for Mixed Signal Circuits

High-Density Superconductive Logic Circuits Utilizing 0 and $π$ Josephson Junctions

A half-micron super self-aligned BiCMOS technology for high speed applications

Internally shunted Josephson junctions with barriers tuned near the metal–insulator transition for RSFQ logic applications

High Speed, High Stability and Low Power Sensing Amplifier for MTJ/CMOS Hybrid Logic Circuits

Reliability Emphasized MTJ/CMOS Hybrid Circuit Towards Ultra-Low Power.

Very Large Scale Integration of Josephson-Junction-Based Superconductor Random Access Memories

Shunt-free cryogenic memory using ferromagnetic insulator-based Josephson junctions

Design of a Superconducting Multiflux Non-Destructive Readout Memory Unit

Ultrahigh-speed low-power CMOS 4:1 multiplexer