Abstract:Dynamic optimization of the fluid loop is critical of the active thermal control system (ATCS) for future spacecraft. In this paper, the transient heat current model of the parallel heat exchanger system is constructed by the thermoelectric analogy method to analyze the optimal control problem of dynamic flow allocation. The continuous free time optimal flow control problem is transformed into a fixed-time nonlinear programming problem which can be solved by the sequential quadratic programming (SQP) algorithm through the control variable parameterization (CVP) and time-scaling methods. The simulation showed that the optimized flow allocation significantly reduced the process time required for system heat dissipation. Compared with the non-gradient particle swarm optimization (PSO) algorithm, the SQP method constructed in this paper decreased the optimization index by about 4%∼6% and the calculation time by about one order of magnitude. To diminish the sensitivity of the SQP algorithm to the initial value, this paper simplifies the model according to the system characteristics. Through the Pontryagin extremum principle, it is found and proved that, under the simplified model, the optimal flow rates are a set of time-independent variables, which significantly reduces the difficulty of the optimization problem, according to which a hybrid algorithm is designed that uses the optimal result of the simplified model as the initial value predictor. Compared with the average of using the random initial value, using the estimated initial value decreased the optimization index by more than 2% and the computation time by about 60%, under the same SQP algorithm.

The Lightweight Design for the Parallel Loops in the Thermal Control System of Manned Spacecraft

Design and Optimization for Fluid Loops of Active Thermal Control System in Manned Spacecraft

Mass Optimization of Thermo Hydraulic Network of Manned Spacecraft Environment Control and Life Support System

Ptimization of the Thermal Network in Parallel Connection of Manned Spacecraft

Study on Conceptual Design of Light-weight Fuselage Structures in Novel Manned Spacecraft

Global Mass Optimization of Spacecraft Thermal Control Loop

A review of technologies of temperature-adjustable heat sink

Performance analysis and optimization of heat pipe-based radiator for space nuclear power system

Conditional Extremum Optimization Analyses and Calculation of the Active Thermal Control System Mass of Manned Spacecraft

Dynamic optimization analyses and algorithm design for the parallel heat exchange system in spacecraft

Research on flow distribution optimization method of fluid loop system based on generalized Lagrange multiplier method

Weight Analysis of Spacecraft Heat Rejection Systems with High Heat Rejection Rate

Optimization of Thermal Network for Spacecraft Thermal Control and Environment Control and Life Support System

Lightweight optimization of space reactor loop heat pipe radiation radiator based on surrogate models

Study on Influence of Radiator Deployment Angle on Spacecraft Thermal Control

Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design

Thermal scale modeling of radiation-convection system in micro-gravity environment

Performance analysis of indirect contact heat pipe radiator for space nuclear power system

Design and thermal characteristic test of a temperature control system for spacecraft precision instrument

Minimization of mass for heat exchanger networks in spacecrafts based on the entransy dissipation theory

Application of Entransy to Optimization Design of Parallel Thermal Network of Thermal Control System in Spacecraft