Abstract:Dynamic optimization of the fluid loop is critical of the active thermal control system (ATCS) for future spacecraft. In this paper, the transient heat current model of the parallel heat exchanger system is constructed by the thermoelectric analogy method to analyze the optimal control problem of dynamic flow allocation. The continuous free time optimal flow control problem is transformed into a fixed-time nonlinear programming problem which can be solved by the sequential quadratic programming (SQP) algorithm through the control variable parameterization (CVP) and time-scaling methods. The simulation showed that the optimized flow allocation significantly reduced the process time required for system heat dissipation. Compared with the non-gradient particle swarm optimization (PSO) algorithm, the SQP method constructed in this paper decreased the optimization index by about 4%∼6% and the calculation time by about one order of magnitude. To diminish the sensitivity of the SQP algorithm to the initial value, this paper simplifies the model according to the system characteristics. Through the Pontryagin extremum principle, it is found and proved that, under the simplified model, the optimal flow rates are a set of time-independent variables, which significantly reduces the difficulty of the optimization problem, according to which a hybrid algorithm is designed that uses the optimal result of the simplified model as the initial value predictor. Compared with the average of using the random initial value, using the estimated initial value decreased the optimization index by more than 2% and the computation time by about 60%, under the same SQP algorithm.

Research on flow distribution optimization method of fluid loop system based on generalized Lagrange multiplier method

Non-linear mapping and multi-objective optimization of leading flow structure in plate-fin heat exchanger

Design and Optimization for Fluid Loops of Active Thermal Control System in Manned Spacecraft

A throughflow-based optimization method for multi-stage axial compressor

Flow Force Analysis and Structural Optimization of a Large Flow Rate Pressure Compensation Valve

Global Mass Optimization of Spacecraft Thermal Control Loop

The Lightweight Design for the Parallel Loops in the Thermal Control System of Manned Spacecraft

Lightweight optimization of space reactor loop heat pipe radiation radiator based on surrogate models

Three-dimensional topology optimization of thermal-fluid-structural problems for cooling system design

Mass Optimization of Thermo Hydraulic Network of Manned Spacecraft Environment Control and Life Support System

Dynamic optimization analyses and algorithm design for the parallel heat exchange system in spacecraft

Development of a New Heat Transfer Optimization Method for Compressible Fluid Flows and It Numerical Verifications

Multi-dimensional Effect on Optimal Network Structure for Fluid Distribution

Research on topology optimization of liquid-cooled plates based on multi-level optimization

A Numerical Method for Shape Optimal Design in the Oseen Flow with Heat Transfer

Topology Optimization Design of Micro-Channel Heat Sink by Considering the Coupling of Fluid-Solid and Heat Transfer

Thermal scale modeling of radiation-convection system in micro-gravity environment

Topology optimization of heat sink based on variable density method

Efficient optimization of parallel micro-channel heat sinks based on flow resistance network model

Numerical Analysis and Optimization on Flow Distribution and Heat Transfer of a U-Type Parallel Channel Heat Sink

Current status and suggestions of satellite borne single-phase fluid loops