Abstract:The utilization of a lithium-cooled nuclear power supply system in conjunction with the He-Xe Brayton power system has great potential for providing power for space exploration missions. This is primarily attributed to its notable characteristics, such as high energy density, substantial output power, long-duration operation cycle, and little vulnerability to environmental factors. One of the salient concerns that necessitates attention is the phenomenon of heat transfer occurring between liquid lithium and a mixture of helium and xenon (He-Xe). The Vertical Cross-Flow Corrugated Plate Heat Exchanger (VC-CPHE) constructed from W-alloy possesses several advantages in space reactor applications compared to other heat exchangers. These include its compact design, which allows for a large heat exchange surface, as well as its ability to shield gamma-ray radiation. This paper investigates the thermal hydraulic properties of the VC-CPHE internal heat transfer medium using Computational Fluid Dynamics (CFD) techniques. The results indicate that, due to the similar flow channel structure of Li and He-Xe, there are similarities in terms of flow direction and periodic distribution of parameters. Nevertheless, due to the distinct thermophysical properties and operational parameters, these materials demonstrate notable disparities in temperature boundary layers, local thermal resistance, and other relevant factors. Furthermore, the optimization of VC-CPHE involves a balancing act between enhancing heat transfer efficacy and minimizing flow resistance. The VC-CPHE demonstrates optimal balanced performance when the inlet cross-angle is set at 45°. In comparison to Li, He-Xe exhibits elevated levels of thermal resistance and pressure loss. Hence, in the investigation of optimizing the corrugation pitch and inlet cross-angle, the optimal balanced size of corrugation pitch is 16mm and inlet cross-angle is 45° on He-Xe side is used as the final result. An increase in the inlet temperature difference of the heat exchanger leads to a slight decrease in the heat transfer coefficient, but an overall improvement in heat transfer. On the basis of obtaining the flow and heat transfer characteristics inside VC-CPHE, the effects of inlet cross-angle, corrugation pitch, and inlet temperature difference on the performance of VC-CPHE are discussed. The findings derived from the present study provide valuable insights for the future design and optimization of VC-CPHE systems in megawatt-class nuclear power deep space exploration spacecraft, particularly in relation to internal heat transfer.

Performance analysis of indirect contact heat pipe radiator for space nuclear power system

Performance analysis and optimization of heat pipe-based radiator for space nuclear power system

A review of technologies of temperature-adjustable heat sink

Neutronic and Thermal-Mechanical Coupling Schemes for Heat Pipe Cooled Reactor Designs

Numerical investigation on thermal behavior of high temperature heat pipe based on thermal resistance network model

Lightweight optimization of space reactor loop heat pipe radiation radiator based on surrogate models

Analysis of temperature field in hot leg piping of space nuclear closed brayton cycle

Experimental Study of Composite Heat Pipe Radiator in Thermal Management of Electronic Components

Experimental evaluation on heat transfer limits of sodium heat pipe with screen mesh for nuclear reactor system

Exploring Biomimetic Heat Pipes for Space Radiator Enhancement

Design, fabrication, and comparative analysis of prototype high-temperature heat pipes charged with sodium for heat pipe cooled reactor NUSTER-100

Numerical Simulation of Heat Pipe Thermal Performance for Aerospace Cooling System Applications

An Improved Model of the Heat Pipe Based on the Network Method Applied on a Heat Pipe Cooled Reactor

Decoupled Thermal-Hydraulic Analysis of an Air-Cooled Separated Heat Pipe for Spent Fuel Pools under Natural Convection

A TRANSIENT AND STEADY-STATE NETWORK MODEL FORANNULAR-WICK HEAT PIPES IN CONTINUUM FLOW PATTERN

Thermoelectric performance study on a heat pipe thermoelectric generator for micro nuclear reactor application

The Super Thermal Conductivity Model for High-Temperature Heat Pipe Applied to Heat Pipe Cooled Reactor

Coupled neutronic, thermal-mechanical and heat pipe analysis of a heat pipe cooled reactor

CFD simulation based on film model of high temperature potassium heat pipe at different positions: Horizontal, vertical, and 45° inclined

Numerical Investigation of Thermal-hydraulics Characteristics of Cross-Flow Corrugated Plate Heat Exchanger for Lithium-cooled Space Nuclear Reactor

THEORETICAL ANALYSIS OF PHOTOVOLTAIC HEAT PUM P FOR ENHANCING HEAT REJECTION OF SPACE RADIATOR